Hiossen
-
-
EK/ET Rigid Protect Cap
• Protects the rigid abutment until applying the final prosthesis• Can be used as the base for a provisional crown• Available for transfer abutment (Ø4.0 excluded) -
Excellent Solid Abutment Driver
• Driver for Excellent Solid Abutments• Connect to the solid abutment by matching up the groove with the triangular indicator• Recommended tightening torque: 30Ncm -
Solid Abutment Driver
• Driver specific for solid abutments• Connect to the solid abutment by matching up the groove with the triangular indicator• Recommended tightening torque: 30Ncm -
-
-
-
-
Ø5.0 EK Transfer Abutment
• Abutment for cement-retained/combination prosthesis at implant level impression• Abutment level impression is available using the rigid impression coping (Ø4.0 excluded)• EK... -
Osstem Machine Torque Driver
• It may not be fastened or disconnected when connecting a normal handpiece• Driver should be used after matching the groove or section of the outer triangle and abutment• Solid,... -
Ø4.5 EK Transfer Abutment
• Abutment for cement-retained/combination prosthesis at implant level impression• Abutment level impression is available using the rigid impression coping (Ø4.0 excluded)• EK... -
Ø4.0 EK Transfer Abutment
• Abutment for cement-retained/combination prosthesis at implant level impression• Abutment level impression is available using the rigid impression coping (Ø4.0 excluded)• EK... -
Ø7.0 Regular ET Rigid Abutment
• Cement-retained prosthesis• Abutment level impression• Ø4.0: torque with the outer driver (code: HORDML/HORDMS)• Ø4.5/5.0/6.0: torque with the outer driver or 1.2... -
Ø6.0 Regular ET Rigid Abutment
• Cement-retained prosthesis• Abutment level impression• Ø4.0: torque with the outer driver (code: HORDML/HORDMS)• Ø4.5/5.0/6.0: torque with the outer driver or 1.2... -
Ø5.0 Regular ET Rigid Abutment
• Cement-retained prosthesis• Abutment level impression• Ø4.0: torque with the outer driver (code: HORDML/HORDMS)• Ø4.5/5.0/6.0: torque with the outer driver or 1.2... -
Repair Torque Driver
• Reduced diameter of shank compared to the Torque Driver (Ø2.1 → 1.6)• The diameter of the screw hole can be minimized during prosthetic repair or SCRP procedures -
Ø4.5 Regular ET Rigid Abutment
• Cement-retained prosthesis• Abutment level impression• Ø4.0: torque with the outer driver (code: HORDML/HORDMS)• Ø4.5/5.0/6.0: torque with the outer driver or 1.2... -
Ø4.0 Mini ET Rigid Abutment
• Cement-retained prosthesis• Abutment level impression• Ø4.0: torque with the outer driver (code: HORDML/HORDMS)• Ø4.5/5.0/6.0: torque with the outer driver or 1.2... -
Angled Torque Driver
• Driver for torque wrench• No holding function• Recommended tightening torque: 30Ncm (excessive torque causes fracture)• Do not remove tube to prevent fragmentation when... -
Torque Driver
• Driver for torque wrench• Tip holding function• May bend or break if excessive torque is applied• Damage is possible even at low torque if not fully engaged• Apply...