Hiossen

ET IV NH Implant Bone level with 11º Morse taper internal hex connection  Ideal thread design for optimal osseointegration in maxillary sinus and/or soft bone Narrow corkscrew threads...

ET IV SA Implant Bone level with 11º Morse taper internal hex connection  Ideal thread design for optimal osseointegration in maxillary sinus and/or soft bone Narrow corkscrew threads...

SS III SA Implant Non-submerged type implant with an internal octa and 8º tapered connection Optimized screw thread design with the ideal SA surface Tapered body design with high initial...

SS III SA Implant Non-submerged type implant with an internal octa and 8º tapered connection Optimized screw thread design with the ideal SA surface Tapered body design with high initial...

EM Provisional Implant used in temporary prosthesis placement for full or partially edentulous patients Neck desgin for path compensation and strength maintenance Provisional cap and lab analog...

K3™ Smart Delivery System (Mount)• Display all your handpieces settings on the 4.3” color LCD  - Water Controller  - 3-way Syringe  - 2 High speed Connection  - 1...

• Resonance Frequency Analysis (RFA)• Implant Stability Quotient (ISQ)• Raise the implant success rate with accurate diagnosis• High Accuracy Measurement Result• Determines...

Vussen Double-Wide Toothbrush with Cap • Wide Sized brush head: 2200 bristles to help clean hard-to-reach places• Consist of soft and hard bristles: Works gently on enamel and gums•...

Main Adapter

• Product Name : S201L• Reduction ratio 20:1• Removable head, easy to clean• Small head with internal cooling system• Speed: 15 – 2,000 rpm• Maximum torque: 55 Ncm

• ISQ Tester Standard plug for US

Hand Piece SURGmatic S11L • Product Name : S11L• Transmission : 1:1• Maximum Speed : 40,000rpm• Maximum Torque : 5.5Ncm• For use with handpiece burs of 44.5 mm standard...

• Multipeg for IS3 and IS4

• Driver is made of stainless steel and works like a screwdriver• Carrier for the MulTipegThe MulTipeg has a magnet in its top that allows it to safely attach inside the Driver

• Retains overdenture with o-ring system• Angle compensation of up to 20°• Torque using an outer driver (code : AORD)• Recommended tightening torque : 30Ncm

Titanium Abutment Screw

Digital Lab Analog is designed to be used with 3D printed models to check for proper position and custom abutment specifications. Used with Digital Lab Analog Placement Tools to allow the analog to...

• Cement-retained/screw-retained/combination type prosthesis• CERECTM CAD/CAM manufactured custom abutment with titanium base and milled zirconia• Torque using a 1.2 hex driver•...

• Depending on the depth of the implant, height (H) is selected• Ø3.2 implant uses exclusive cover screw• Tighten by hand with 1.2 hex driver

Used to scan the position of the implant where space is limited • Use with Scan Body (e.g. Connect Scan Body before scanning)• Tighten with a 1.2 hex hand driver