Hiossen Products - Hiossen Implant USA eShop

Ø5.0 AutoBone Collector

•Comes in Ø 3.0 to 6.0 in diameter and a Drill + Stopper set•Recommended drilling speed : 300 ~ 600rpm•Use of drill and stopper : 50 times??Before initial drilling, connect the...

Ø6.0 EK Healing Abutment

• Hand tighten it with a 1.2 hex driver• The gingiva height is 0.5mm higher when engaged in Ø3.5 implant

Ø4.0 AutoBone Collector

•Comes in Ø 3.0 to 6.0 in diameter and a Drill + Stopper set•Recommended drilling speed : 300 ~ 600rpm•Use of drill and stopper : 50 times??Before initial drilling, connect the...

Ø3.0 AutoBone Collector

•Comes in Ø 3.0 to 6.0 in diameter and a Drill + Stopper set•Recommended drilling speed : 300 ~ 600rpm•Use of drill and stopper : 50 times??Before initial drilling, connect the...

SS Closing Screw

• Select appropriate mount according to the implant platform• Tighten with a 1.2 hex hand driver

SS Cover Screw

• Select appropriate mount according to the implant platform• Tighten with a 1.2 hex hand driver

ET Regular Cover Screw

• Depending on the depth of the implant, height (H) is selected• Ø3.2 implant uses exclusive cover screw• Tighten by hand with 1.2 hex driver

Tenting Screw

• Shorter than external type for ease of suturing• Utilized in place of implant for inadequate bone mass or narrow ridge• Compatible with OB2 and OB3• Recommended placement...

ET Mini Cover Screw

• Depending on the depth of the implant, height (H) is selected• Ø3.2 implant uses exclusive cover screw• Tighten by hand with 1.2 hex driver

Ø3.5 OssBuilder Anchor (EK)

•Exclusively for EK implant (shoulder contact)•Compatible with OB2 and OB3•Tightened with a 0.9 hex hand drive•Recommended tightening torque :...

Regular OssBuilder Anchor (ET)

•Exclusively for ET implant (shoulder contact)•Compatible with OB2 and OB3•Tightened with a 0.9 hex hand drive•Recommended tightening torque :...

Mini OssBuilder Anchor (ET)

•Exclusively for ET implant (shoulder contact)•Compatible with OB2 and OB3•Tightened with a 0.9 hex hand drive•Recommended tightening torque :...

Ø4.0 Cover Cap (EK/ET)

•Submerged procedure•Compatible with OB2 and OB3•Tightened with a 0.9 hex hand drive•Recommended tightening torqu??Disposable. Do not reuse

Ø4.0 EK Cover Screw

• Depending on the depth of the implant, choose the height (H) of the cover screw• Ø3.5 implant used exclusive cover screws• Hand tighten it with 1.2 hex driver

Ø3.5 EK Cover Screw

• Depending on the depth of the implant, choose the height (H) of the cover screw• Ø3.5 implant used exclusive cover screws• Hand tighten it with 1.2 hex driver