GBR Kit

• Our GBR (Guided bone regeneration) kit offers all the tools that can fix shielding membrane,    fix block bone, and collect autogenous bone.  

• Incorporates all necessary tools for GBR procedure• Convenient GBR procedure by using OssBuilder OB2 and OB3, along with OB anchor, cover cap and healing cap.• Use of tenting screw allows users to deal with extensive vertical bone loss...

• Manual driver• Tip holding function (except internal hex type)• Internal hex type length: 11mm

• Driver for engine• Tip holding feature (except internal hex type)• Internal hex type length : 8

•Surgical tool for ejecting the harvested autogenous bone from the stopper

•Stops at a drilling depth of 4mm for harvesting of cortical bone•Stores the autogenous bone harvested from drilling

•Stops at a drilling depth of 4mm for harvesting of cortical bone•Stores the autogenous bone harvested from drilling

•Stops at a drilling depth of 4mm for harvesting of cortical bone•Stores the autogenous bone harvested from drilling

•Stops at a drilling depth of 4mm for harvesting of cortical bone•Stores the autogenous bone harvested from drilling

•Comes in Ø 3.0 to 6.0 in diameter and a Drill + Stopper set•Recommended drilling speed : 300 ~ 600rpm•Use of drill and stopper : 50 times??Before initial drilling, connect the stopper to the first stage locking and...

•Comes in Ø 3.0 to 6.0 in diameter and a Drill + Stopper set•Recommended drilling speed : 300 ~ 600rpm•Use of drill and stopper : 50 times??Before initial drilling, connect the stopper to the first stage locking and...

•Comes in Ø 3.0 to 6.0 in diameter and a Drill + Stopper set•Recommended drilling speed : 300 ~ 600rpm•Use of drill and stopper : 50 times??Before initial drilling, connect the stopper to the first stage locking and...

•Comes in Ø 3.0 to 6.0 in diameter and a Drill + Stopper set•Recommended drilling speed : 300 ~ 600rpm•Use of drill and stopper : 50 times??Before initial drilling, connect the stopper to the first stage locking and...

• Shorter than external type for ease of suturing• Utilized in place of implant for inadequate bone mass or narrow ridge• Compatible with OB2 and OB3• Recommended placement depth: hard/normal bone 3~5mm, soft bone 5mm or more•...

•Exclusively for EK implant (shoulder contact)•Compatible with OB2 and OB3•Tightened with a 0.9 hex hand drive•Recommended tightening torque : 12~15Ncm•C=Connection??Disposable. Do not reuse

•Exclusively for ET implant (shoulder contact)•Compatible with OB2 and OB3•Tightened with a 0.9 hex hand drive•Recommended tightening torque : 12~15Ncm•C=Connection??Disposable. Do not reuse

•Exclusively for ET implant (shoulder contact)•Compatible with OB2 and OB3•Tightened with a 0.9 hex hand drive•Recommended tightening torque : 12~15Ncm•C=Connection??Disposable. Do not reuse

•Submerged procedure•Compatible with OB2 and OB3•Tightened with a 0.9 hex hand drive•Recommended tightening torqu??Disposable. Do not reuse

Healing Cap (EK/ET)•Non-submerged procedure•Compatible with OB2 and OB3•Tightened with a 0.9 hex hand drive•Recommended tightening torque : 5~8Ncm??Disposable. Do not reuse        

Healing Cap (EK / ET)•Non-submerged procedure•Compatible with OB2 and OB3•Tightened with a 0.9 hex hand drive•Recommended tightening torque : 5~8Ncm??Disposable. Do not reuse        

•Use in drilling before inserting the tenting screw•Hard bone : Ø 1.5 / normal, soft bone : Ø 1.0 drill•Laser marking : 1, 2, 3, 4, 5, 6, 7, and 8mm marking lines•Recommended drilling speed : 1,200 ~1,500rpm•Size of...

•Use in drilling before inserting the tenting screw•Hard bone : Ø 1.5 / normal, soft bone : Ø 1.0 drill•Laser marking : 1, 2, 3, 4, 5, 6, 7, and 8mm marking lines•Recommended drilling speed : 1,200 ~1,500rpm•Size...