ET / TS System

LOCATOR® Angled Abutments are the newest innovation offered by the market’s leading solution for edentulous patients. The new Angled LOCATOR abutment can correct divergence of 15 degrees, in addition to the 20 degrees of abutment angulation...

LOCATOR® Angled Abutments are the newest innovation offered by the market’s leading solution for edentulous patients. The new Angled LOCATOR abutment can correct divergence of 15 degrees, in addition to the 20 degrees of abutment angulation...

• Attached to the implant to verify bite impression.• Tighten with a 1.2 hex hand driver• Packing unit: 2ea

Abutment Screw for Convertible Abutment

Abutment Screw

• Cylinder screw that can be used for   - Esthetic-low Gold Cylinder   - Esthetic-low Plastic Cylinder   - Esthetic-low Temporary Cylinder

• Screw-retained prosthesis in multiple scenarios• Angle compensation up to 60°• Torque using convertible abutment outer driver    - Ø4.0: torque using o-ring abutment driver (code: AORD)    - Ø5.0/6...

• Screw-retained prosthesis in multiple scenarios• Angle compensation up to 60°• Torque using convertible abutment outer driver    - Ø4.0: torque using o-ring abutment driver (code: AORD)    - Ø5.0/6...

• Screw-retained prosthesis in multiple scenarios• Angle compensation up to 60°• Torque using convertible abutment outer driver    - Ø4.0: torque using o-ring abutment driver (code: AORD)    - Ø5.0/6...

• Screw-retained prosthesis in multiple scenarios• Angle compensation up to 60°• Torque using convertible abutment outer driver    - Ø4.0: torque using o-ring abutment driver (code: AORD)    - Ø5.0/6...

• Retains overdenture with O-ring system• Angle compensation up to 20°• Torque using O-ring driver (code: AORD)• Recommended tightening torque: 30Ncm (mini/regular)• Ball head diameter• Normal size: Ø2.25 (H 3...

• Retains overdenture with O-ring system• Angle compensation up to 20°• Torque using O-ring driver (code: AORD)• Recommended tightening torque: 30Ncm (mini/regular)• Ball head diameter• Normal size: Ø2.25 (H 3...

• Protects GoldCast/plastic cylinder joints duringpolishing process• Tighten with a 1.2 hex hand driver

• Protects GoldCast/plastic cylinder joints duringpolishing process• Tighten with a 1.2 hex hand driver

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + EbonyGold screw

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + EbonyGold screw

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + EbonyGold screw

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + EbonyGold screw

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + EbonyGold screw

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + EbonyGold screw

• Transfer impression coping• Connected with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin

• Transfer impression coping• Connected with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin

• Components for implant level impression• A pick-up impression coping• Tighten with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin(*)

• Components for implant level impression• A pick-up impression coping• Tighten with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin(*)

• Components for implant level impression• A pick-up impression coping• Tighten with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin(*)

• Screw-retained prosthesis• Customized prosthesis cast with non-precious alloys• Torque using a 1.2 hex driver• Packing unit: cylinder + Ebony-gold cylinder screw

• Screw-retained prosthesis• Customized prosthesis cast with non-precious alloys• Torque using a 1.2 hex driver• Packing unit: cylinder + Ebony-gold cylinder screw

• Screw-retained prosthesis• Customized prosthesis cast with non-precious alloys• Torque using a 1.2 hex driver• Packing unit: cylinder + Ebony-gold cylinder screw

• Provisional prosthesis (Ti Gr-3)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• Provisional prosthesis (Ti Gr-3)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• Provisional prosthesis (Ti Gr-3)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• Screw-retained prosthesis• Customized prosthesis cast with gold alloy• Cylinder melting point: 1400~1450°C (2552~2642°F)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder...

• Screw-retained prosthesis• Customized prosthesis cast with gold alloy• Cylinder melting point: 1400~1450°C (2552~2642°F)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder...

• Screw-retained prosthesis• Customized prosthesis cast with gold alloy• Cylinder melting point: 1400~1450°C (2552~2642°F)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder...

• Combination-retained prosthesis possible• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + EbonyGold cylinder screw

• Combination-retained prosthesis possible• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + EbonyGold cylinder screw

• ET multi abutment combination with multiple prosthetic options• Non-hex type• Torque using a 1.2 hex driver

• Multi Ti-Base abutment combination for multiple prosthetic options• Used in combination with ET Multi Scan Body• Abutment level impression• Non-hex type• Torque using a 1.2 hex driver• Recommended tightening torque:...

• Protects GoldCast/plastic cylinder joints during polishing process• Tighten with a 1.2 hex hand driver

• Transfer impression coping for esthetic-low abutment• Connected with a 1.2 hex hand driver