Octa Abutment
-
SS Regular Octa Abutment (regular+wide)
• Screw-retained prosthesis for multiple prosthetic options• Angle compensation of up to 60°• Torque using a dedicated outer driver (code: ODSL/ODSS)• Recommended tightening torque: 30Ncm -
-
-
SS Wide Octa Transfer Impression Coping
• Hand tightened with a 1.2 hex driver• Packing unit: Impression coping body + Guide pin -
SS Regular Octa Transfer Impression Coping
• Hand tightened with a 1.2 hex driver• Packing unit: Impression coping body + Guide pin -
SS Octa Pick-up Impression Coping Guide Pin
• A pick up impression copingfor octa abutment• Tighten with a 1.2 hex hand driver• Packing unit:impression coping body + guide pin(*) -
SS Wide Octa Pick-up Impression Coping
• A pick up impression coping for octa abutment• Tighten with a 1.2 hex hand driver• Packing unit:impression coping body + guide pin(*) -
SS Regular Octa Pick-up Impression Coping
• A pick up impression coping for octa abutment• Tighten with a 1.2 hex hand driver• Packing unit:impression coping body + guide pin(*) -
SS Wide Octa Plastic Cylinder
• Screw-retained prosthesis• Customized prosthesis cast with non-precious alloys• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw -
SS Regular Octa Plastic Cylinder
• Screw-retained prosthesis• Customized prosthesis cast with non-precious alloys• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw -
SS Wide Octa Temporary Cylinder
• Provisional prosthesis (Ti Gr-3)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw -
SS Regular Octa Temporary Cylinder
• Provisional prosthesis (Ti Gr-3)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw -
SS Wide Octa Gold Cylinder
• Screw-retained prosthesis• Customized prosthesis cast with gold alloy• Cylinder melting point: 1400-1450°C (2552~2642°F)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder... -
SS Regular Octa Gold Cylinder
• Screw-retained prosthesis• Customized prosthesis cast with gold alloy• Cylinder melting point: 1400-1450°C (2552~2642°F)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder... -
SS Wide Octa Protect Cap
• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + Ti Screw -
SS Regular Octa Protect Cap
• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + Ti Screw