Multi Angled Abutment

Abutment Screw

• Cylinder screw that can be used for   - Esthetic-low Gold Cylinder   - Esthetic-low Plastic Cylinder   - Esthetic-low Temporary Cylinder

• Used in fabricating a temporary prosthesis (Ti Gr-3)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit : cylinder + Ti cylinder screw• Ti cylinder screw product code: MTS200

• ET multi abutment combination with multiple prosthetic options• Non-hex type• Torque using a 1.2 hex driver

• Multi Ti-Base abutment combination for multiple prosthetic options• Used in combination with ET Multi Scan Body• Abutment level impression• Non-hex type• Torque using a 1.2 hex driver• Recommended tightening torque:...

• Protects GoldCast/plastic cylinder joints during polishing process• Tighten with a 1.2 hex hand driver

• Transfer impression coping for esthetic-low abutment• Connected with a 1.2 hex hand driver

• Transfer impression coping for esthetic-low abutment• Connected with a 1.2 hex hand driver

• Guide pin for Esthetic-low Pick-up Impression Coping

• Components for implant level impression taking• Pick up impression coping for esthetic-low abutment• Tighten with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin(*)

Narrow Type • Used in fabricating a temporary prosthesis (Ti Gr-3)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• A protective cap• Tighten with a 1.2 hex hand driver

• Screw-retained prosthesis for multiple prosthetic options• Same platform as the multi abutment• Restorative components: US esthetic low cylinder (regular/non-hex)• Abutment screw included• Torque using a 1.2 hex driver•...

• Screw-retained prosthesis for multiple prosthetic options• Same platform as the multi abutment• Restorative components: US esthetic low cylinder (regular/non-hex)• Abutment screw included• Torque using a 1.2 hex driver•...

• Cast with non-precious metal alloys• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• Screw-retained prosthesis• Cast with gold alloys• Cylinder melting point: 1400~1450°C (2552~2642°F)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• Used for producing combination prosthesis in multi abutment• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw• Multi angled abutment can be used (Non-Hex)