Hiossen
-
Ø7.0 EK Regular Pick-up Impression Coping
• Components for implant level impression using an Open Tray method.• Ensures precise positioning of the internal hex in the impression material.• Tighten with a 1.2 hex hand... -
Ø6.0 EK Regular Pick-up Impression Coping
• Components for implant level impression using an Open Tray method.• Ensures precise positioning of the internal hex in the impression material.• Tighten with a 1.2 hex hand... -
Ø5.0 EK Regular Pick-up Impression Coping
• Components for implant level impression using an Open Tray method.• Ensures precise positioning of the internal hex in the impression material.• Tighten with a 1.2 hex hand... -
Ø4.5 EK Regular Pick-up Impression Coping
• Components for implant level impression using an Open Tray method.• Ensures precise positioning of the internal hex in the impression material.• Tighten with a 1.2 hex hand... -
Ø4.0 EK Regular Pick-up Impression Coping
• Components for implant level impression using an Open Tray method.• Ensures precise positioning of the internal hex in the impression material.• Tighten with a 1.2 hex hand... -
Ø6.0 EK Transfer Abutment
• Abutment for cement-retained/combination prosthesis at implant level impression• Abutment level impression is available using the rigid impression coping (Ø4.0 excluded)• EK... -
Ø5.5 ET Regular Bite Index
• Connected to implant to check the bite impression• Tighten with a 1.2 hex hand driver• Packing unit: 2ea -
Abutment Holder
• Used to hold abutments and help deliver them to hard-to-reach sites of the oral cavity -
-
Ø6.0 Reamer Tip for Solid, Excellent Solid Abutment
• Tool used to remove the excess cast after plastic coping is set• For both solid Ø6.0 and excellent solid Ø4.8• P = Platform -
Ø4.5 ET Mini Bite Index
• Connected to implant to check the bite impression• Tighten with a 1.2 hex hand driver• Packing unit: 2ea -
Ø4.8 Reamer Tip for Solid, Excellent Solid Abutment
• Tool used to remove the excess cast after plastic coping is set• For both solid Ø6.0 and excellent solid Ø4.8• P = Platform -
Ø5.5 EK Regular Bite Index
• The gingival height is 0.5mm higher when engaged in Ø3.5 implant• Attached to the implant to verify bite impression.• Tighten with a 1.2 hex hand driver• Packing unit:... -
Ø6.0 Reamer Tip for Rigid Abutment
• Tool used to remove the excess cast after plastic coping is set -
Ø5.0 Reamer Tip for Rigid Abutment
• Tool used to remove the excess cast after plastic coping is set -
Ø4.5 Reamer Tip for Rigid Abutment
• Tool used to remove the excess cast after plastic coping is set -
Ø4.0 Reamer Tip for Rigid Abutment
• Tool used to remove the excess cast after plastic coping is set -
-
Finishing Reamer Set
• Tool used to remove the excess cast after plastic coping is set Reamer user guide1. Select a reamer tip that is the same size as Abutment size and connect it to the burn-out cylinder2. Firmly... -
