Description

• Reduced diameter of shank compared to the Torque Driver (Ø2.1 → 1.6)
• The diameter of the screw hole can be minimized during prosthetic repair or SCRP procedures

View AllClose

Additional Information

Manufacturer:

Hiossen

View AllClose

Torque Driver

• Driver for torque wrench• Tip holding function• May bend or break if excessive torque is applied• Damage is possible even at low torque if not fully engaged• Apply vertical pressure when applying...

Torque Driver Handle

• Used for initial insertion by hand after fastening to torque driver

Angled Torque Driver

• Driver for torque wrench• No holding function• Recommended tightening torque: 30Ncm (excessive torque causes fracture)• Do not remove tube to prevent fragmentation when broken• Recommended number...