Hiossen

Implementation of the EM implant provisional abutment part on the working model

Used for temporary prosthesis production (titanium)

Used when vertical dimension is shorter than the retainer cap Laboratory: Used for production of overdenture Packing unit: retainer cap + O-ring

Used when vertical dimension is shorter than the retainer cap Laboratory: Used for production of overdenture Packing unit: retainer cap + O-ring

• Screw-retained prosthesis• Cast with gold alloys• Cylinder melting point: 1400~1450°C (2552~2642°F)• Torque using a 1.2 hex driver• Recommended tightening torque:...

• Cement-retained/combination type prosthesis• Customized margins can be contoured as needed• Implant level impression• Torque using a 1.2 hex driver• Recommended tightening...

O-ring set Packing unit: O-ring x 5ea

• Used for producing combination prosthesis in multi abutment• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder...

O-ring housing Place an appropriate o-ring in the metal housing before connecting to the abutment Packing unit: retainer cap + O-ring

• Cement-retained/combination type prosthesis• Customized margins can be contoured as needed• Implant level impression• Torque using a 1.2 hex driver• Recommended tightening...

• Cement-retained/combination type prosthesis• Customized margins can be contoured as needed• Implant level impression• Torque using a 1.2 hex driver• Recommended tightening...

• Used for selecting Angled Abutment A or B type, diameter, and G/H when in oral cavity or in a working model

• Abutment designed for creating cement-retained or combination prostheses• Utilized to modify the contour of abutment margins• Impressions taken at the implant level• Tighten...

• Used for selecting Angled Abutment A or B type, diameter, and G/H when in oral cavity or in a working model

Used as a prosthetic framework by attaching into MS implant narrow ridge After prosthetic casting, the margin is adjusted with a special-purpose reamer

• Abutment designed for creating cement-retained or combination prostheses• Utilized to modify the contour of abutment margins• Impressions taken at the implant level• Tighten...

• Used for selecting Angled Abutment A or B type, diameter, and G/H when in oral cavity or in a working model

Used as a prosthetic framework by attaching into MS implant narrow ridge After prosthetic casting, the margin is adjusted with a special-purpose reamer

• Remove jammed abutment of non-hex type transfer abutment• The tip is for mini platform abutments;the next step for regular platform• Remove the abutment screw, insert Separate Tool...

Insert into impression body for EM Narrow Ridge prothesis fabrication