Hiossen
-
Ø4.7 Remover Screw - Biohorizon Wide (Internal)
• When securely fastened to the implant, it serves as a supporting structure for the Remover Body• Use the proper type that matches the diameter of the implant to be removed (ET/SS/US,... -
Ø4.1 Remover Screw - Biohorizon (Internal)
• When securely fastened to the implant, it serves as a supporting structure for the Remover Body• Use the proper type that matches the diameter of the implant to be removed (ET/SS/US,... -
EK Laboratory Screw
• Laboratory screw: This is an abutment screw designed specifically for laboratory tasks -
EK Waxing Screw
• Waxing screw: utilized in creating screw-type abutments and transfer jigs by extending the screw hole to the upper section -
Ø5.0/6.0 Remover Screw - 3I (Full Osseotite Tapered Certain)
• When securely fastened to the implant, it serves as a supporting structure for the Remover Body• Use the proper type that matches the diameter of the implant to be removed (ET/SS/US,... -
Ø4.0 Remover Screw - 3I (Full Osseotite Tapered Certain)
• When securely fastened to the implant, it serves as a supporting structure for the Remover Body• Use the proper type that matches the diameter of the implant to be removed (ET/SS/US,... -
Ø4.8 Remover Screw - Straumann (Bone Level)
• When securely fastened to the implant, it serves as a supporting structure for the Remover Body• Use the proper type that matches the diameter of the implant to be removed (ET/SS/US,... -
Ø4.1 Remover Screw - Straumann (Bone Level)
• When securely fastened to the implant, it serves as a supporting structure for the Remover Body• Use the proper type that matches the diameter of the implant to be removed (ET/SS/US,... -
Ø3.3 Remover Screw - Straumann (Bone Level)
• When securely fastened to the implant, it serves as a supporting structure for the Remover Body• Use the proper type that matches the diameter of the implant to be removed (ET/SS/US,... -
Ø3.5 Remover Screw - Nobel (Replace)
• When securely fastened to the implant, it serves as a supporting structure for the Remover Body• Use the proper type that matches the diameter of the implant to be removed (ET/SS/US,... -
Ø3.5 Remover Screw - Nobel (Active)
• When securely fastened to the implant, it serves as a supporting structure for the Remover Body• Use the proper type that matches the diameter of the implant to be removed (ET/SS/US,... -
Multi Scan Body
• ET multi abutment combination with multiple prosthetic options• Non-hex type• Torque using a 1.2 hex driver -
Multi Ti-Base
• Multi Ti-Base abutment combination for multiple prosthetic options• Used in combination with ET Multi Scan Body• Abutment level impression• Non-hex type• Torque using a 1.2... -
Ø4.8 Esthetic-low Polishing Protector
• Protects GoldCast/plastic cylinder joints during polishing process• Tighten with a 1.2 hex hand driver -
Ø4.8 Esthetic-low Lab Analog
• Transfer impression coping for esthetic-low abutment• Connected with a 1.2 hex hand driver -
Ø4.8 Esthetic-low Transfer Impression Coping
• Transfer impression coping for esthetic-low abutment• Connected with a 1.2 hex hand driver -
Ø4.8 Esthetic-low Pick-up Impression Coping Guide Pin
• Guide pin for Esthetic-low Pick-up Impression Coping -
Ø4.8 Esthetic-low Pick-up Impression Coping
• Components for implant level impression taking• Pick up impression coping for esthetic-low abutment• Tighten with a 1.2 hex hand driver• Packing unit: impression coping body +... -
Ø4.8 Esthetic-low Narrow Temporary Cylinder
Narrow Type • Used in fabricating a temporary prosthesis (Ti Gr-3)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw -
