Hiossen

Laser markings on drill match implant length specifications: (8/10/11.5/13/15 mm)In cortical bone, it is recommended to use the lance drill to drill to the final implant lengthLong type has a...

• Laser markings on drill match implant length specifications (8.0 / 10.0 / 11.5 / 13.0 / 15.0 mm)• In cortical bone, it is recommended to use the lance drill to drill to the final implant...

Anterior Narrow Ridge optimized for MS Fixture placementUsed to place MS Fixtures for the mandibular anterior and narrow bone width areasUsed for MS Fixtures(Narrow Ridge, Denture) placementStraight...

The drill is used to removing cortical bone at the hard bone (for ultra-wide)Dedicated drill for each implant diameterIt is recommended to drill to the bottom of the marking line

• Protect the implant’s internal connection when using the SmartBrush 1 & 2• Torque Using a 1.2 hex driver, tighten to about 5Ncm

• Debride implant• After removing the patient's prosthesis and abutment, connect the protect screw before using• Must use irrigation and suction during polishing• Recommended...

• Bristle designed for effective debridement of the implant surface• After removing the patient's prosthesis and abutment, connect the protect screw before using• Recommended speed :...

• Creates a bone lid while forming the lateral window• Cutting edge design based on the CAS drill, enhancing safety• Recommended speed: 1,200 ~ 1,500rpm• Excessive drilling may...

• Taper drill for Type III fixtures• Specification by diameter and length• Color coding displays fixture diameter• One step large-diameter drill is used• to remove cortical...

• Forms a bone window and collects autogenous bone simultaneously• Excellent penetration due to the combination of macro and micro cutting edges• Stopper system safely controls the...

• Taper drill for Type III fixtures• Specification by diameter and length• Color coding displays fixture diameter• One step large-diameter drill is used• to remove cortical...

• Taper drill for Type III fixtures• Specification by diameter and length• Color coding displays fixture diameter• One step large-diameter drill is used• to remove cortical...

• Taper drill for Type III fixtures• Specification by diameter and length• Color coding displays fixture diameter• One step large-diameter drill is used• to remove cortical...

• Taper drill for Type III fixtures• Specification by diameter and length• Color coding displays fixture diameter• One step large-diameter drill is used• to remove cortical...

Round shape with no cutting edges for safe membrane liftingSelect Membrane Lifter diameter according to the CAS drill diameter used (head diameter: CAS drill diameter -0.2mm)Use CAS stoppers to...

• Taper drill for Type III fixtures• Specification by diameter and length• Color coding displays fixture diameter• One step large-diameter drill is used• to remove cortical...

• Taper drill for Type III fixtures• Specification by diameter and length• Color coding displays fixture diameter• One step large-diameter drill is used• to remove cortical...

• Hydraulic pressure is used to separate and lift the sinus membrane• Securly fits ø2.8 ~ ø4.1 CAS drilled osteotomies

• Specailized drill designed to penetrate the sinus floor without damaging the schneiderian membrane by forming a conical bone lid• Four blade drill design provides superior bone removing...

• Gradually expands narrow alveolar ridge• Use the Expansion Drills in numerical order based on the diameter of the fixture• Recommended speed: 25 ~ 35rpm