Hiossen
-
Ø4.0 ET Mini Convertible Abutment
• Screw-retained prosthesis in multiple scenarios• Angle compensation up to 60°• Torque using convertible abutment outer driver - Ø4.0: torque using o-ring... -
Ø3.5 ET Regular Stud Abutment
• Retains overdenture with O-ring system• Angle compensation up to 20°• Torque using O-ring driver (code: AORD)• Recommended tightening torque: 30Ncm (mini/regular)•... -
Ø3.5 ET Mini Stud Abutment
• Retains overdenture with O-ring system• Angle compensation up to 20°• Torque using O-ring driver (code: AORD)• Recommended tightening torque: 30Ncm (mini/regular)•... -
Ø3.5 EK Stud Abutment
• Retains overdenture with O-ring system• Angle compensation up to 20°• Torque using O-ring driver (code: HAORD)• Recommended tightening torque: 30Ncm (mini/regular)•... -
Ø6.0 Regular Convertible Polishing Protector
• Protects GoldCast/plastic cylinder joints duringpolishing process• Tighten with a 1.2 hex hand driver -
Ø4.0 Mini/Regular Convertible Polishing Protector
• Protects GoldCast/plastic cylinder joints duringpolishing process• Tighten with a 1.2 hex hand driver -
-
Ø5.5 485 Drill
• Included in 485 Kit• A drill for placing short implants in alveolar bone lacking in vertical dimension• Ø 2.2 drill: straight drill• Except for Ø 2.2 drill, the... -
Ø5.0 485 Drill
• Included in 485 Kit• A drill for placing short implants in alveolar bone lacking in vertical dimension• Ø 2.2 drill: straight drill• Except for Ø 2.2 drill, the... -
Ø4.5 485 Drill
• Included in 485 Kit• A drill for placing short implants in alveolar bone lacking in vertical dimension• Ø 2.2 drill: straight drill• Except for Ø 2.2 drill, the... -
Ø4.0 485 Drill
• Included in 485 Kit• A drill for placing short implants in alveolar bone lacking in vertical dimension• Ø 2.2 drill: straight drill• Except for Ø 2.2 drill, the... -
Ø3.5 Pilot Drill
• Included in 485 Kit• A drill for placing short implants in alveolar bone lacking in vertical dimension• Ø 2.2 drill: straight drill• Except for Ø 2.2 drill, the... -
Ø2.2 Twist Drill for 485 Kit
• Included in 485 Kit• A drill for placing short implants in alveolar bone lacking in vertical dimension• Ø 2.2 drill: straight drill• Except for Ø 2.2 drill, the... -
-
OssBuilder 3 - Jaw Builder Horizontal 10
3-D Pre-formed design with no trimmings or bending required- 3-D Pre-formed Ti mesh to fit the geometry of bone defect- Available in various sizes Mesh type membrane with no risk of exposure-... -
OssBuilder 3 - Jaw Builder Vertical 20
3-D Pre-formed design with no trimmings or bending required- 3-D Pre-formed Ti mesh to fit the geometry of bone defect- Available in various sizes Mesh type membrane with no risk of exposure-... -
OssBuilder 3 - Jaw Builder Horizontal 20
3-D Pre-formed design with no trimmings or bending required- 3-D Pre-formed Ti mesh to fit the geometry of bone defect- Available in various sizes Mesh type membrane with no risk of exposure-... -
OssBuilder 3 - Jaw Builder Vertical 10
3-D Pre-formed design with no trimmings or bending required- 3-D Pre-formed Ti mesh to fit the geometry of bone defect- Available in various sizes Mesh type membrane with no risk of exposure-... -
OssBuilder 2 - Lateral Builder, ?(3 Wall)
3-D Pre-formed design with no trimmings or bending required- 3-D Pre-formed Ti mesh to fit the geometry of bone defect- Available in various sizes Mesh type membrane with no risk of exposure-... -
OssBuilder 2 - Lateral Builder, ?(2 Wall)
3-D Pre-formed design with no trimmings or bending required- 3-D Pre-formed Ti mesh to fit the geometry of bone defect- Available in various sizes Mesh type membrane with no risk of exposure-...