Prosthetics

• Select appropriate mount according to the implant platform• Tighten with a 1.2 hex hand driver

• Select appropriate mount according to the implant platform• Tighten with a 1.2 hex hand driver

• Tighten with a 1.2 hex hand driver

• Tighten with a 1.2 hex hand driver

• Tighten with a 1.2 hex hand driver

• Tighten with a 1.2 hex hand driver

• Tighten with a 1.2 hex hand driver

• Mini platform prosthetic parts for Ø3.5 & 3.2 implants colored in yellow• Tighten with a 1.2 hex hand driver

• Mini platform prosthetic parts for Ø3.5 & 3.2 implants colored in yellow• Tighten with a 1.2 hex hand driver

• Hand tighten it with a 1.2 hex driver• The gingiva height is 0.5mm higher when engaged in Ø3.5 implant

• Hand tighten it with a 1.2 hex driver• The gingiva height is 0.5mm higher when engaged in Ø3.5 implant

• Hand tighten it with a 1.2 hex driver• The gingiva height is 0.5mm higher when engaged in Ø3.5 implant

• Components that replace resin caps before wax up using solid abutments• Used in the same color as solid impression coping

• Select appropriate mount according to the implant platform• Tighten with a 1.2 hex hand driver

• Components that replace resin caps before wax up using solid abutments• Used in the same color as solid impression coping

• Select appropriate mount according to the implant platform• Tighten with a 1.2 hex hand driver

• Components for solid abutment impression• Possibility of precise prosthesis using lab analog• Color coded by abutment height

• Components for solid abutment impression• Possibility of precise prosthesis using lab analog• Color coded by abutment height

• Depending on the depth of the implant, height (H) is selected• Ø3.2 implant uses exclusive cover screw• Tighten by hand with 1.2 hex driver

• Protects the solid abutment and minimizes patient irritation• Can be used as the base for a provisional crown

• Depending on the depth of the implant, height (H) is selected• Ø3.2 implant uses exclusive cover screw• Tighten by hand with 1.2 hex driver

• Protects the solid abutment and minimizes patient irritation• Can be used as the base for a provisional crown

• Depending on the depth of the implant, choose the height (H) of the cover screw• Ø3.5 implant used exclusive cover screws• Hand tighten it with 1.2 hex driver

• Depending on the depth of the implant, choose the height (H) of the cover screw• Ø3.5 implant used exclusive cover screws• Hand tighten it with 1.2 hex driver

• Retains overdenture with o-ring system• Angle compensation of up to 20°• Torque using an outer driver (code : AORD)• Recommended tightening torque : 30Ncm

Digital Lab Analog is designed to be used with 3D printed models to check for proper position and custom abutment specifications. Used with Digital Lab Analog Placement Tools to allow the analog to be placed in the 3D Model easily. Tighten with a 1.2...

Used for digital impressions and to support a digital workflow Tightened with an 1.2 hex driver Mini Short, Mini Long, Regular Short, Regular Long Scanbody+screw  

• Depending on the depth of the implant, height (H) is selected• Ø3.2 implant uses exclusive cover screw• Tighten by hand with 1.2 hex driver