EK System

• Cement/screw-retained temporary prosthesis• Utilized for producing provisional prostheses after prepping• Impressions taken at the implant level• Torqued using a 1.2 hex driver• Recommended torque for tightening: 20Ncm•...

• Cement/screw-retained temporary prosthesis• Utilized for producing provisional prostheses after prepping• Impressions taken at the implant level• Torqued using a 1.2 hex driver• Recommended torque for tightening: 20Ncm•...

• Abutment designed for creating screw-retained prostheses• Used for producing customized casting prosthesis through non-precious alloy• Melting temperature of abutment: 1,400~1,450°C (2552~2822°F)• Impressions taken at the...

• Abutment designed for creating screw-retained prostheses• Used for producing customized casting prosthesis through non-precious alloy• Melting temperature of abutment: 1,400~1,450°C (2552~2822°F)• Impressions taken at the...

• Abutment designed for creating cement-retained or combination prostheses• Used for producing customized prosthesis through gold alloy casting.• Melting temperature of abutment: 1,400~1,450°C (2552~2822°F)• Impressions taken...

• Abutment designed for creating cement-retained or combination prostheses• Used for producing customized prosthesis through gold alloy casting.• Melting temperature of abutment: 1,400~1,450°C (2552~2822°F)• Impressions taken...

• Abutment designed for creating cement-retained or combination prostheses• Utilized to modify the contour of abutment margins• Impressions taken at the implant level• Tighten using a 1.2 hex driver• The gingival height is 0.5mm...

• Abutment designed for creating cement-retained or combination prostheses• Utilized to modify the contour of abutment margins• Impressions taken at the implant level• Tighten using a 1.2 hex driver• The gingival height is 0.5mm...

• Abutment designed for creating cement-retained or combination prostheses• Utilized to modify the contour of abutment margins• Impressions taken at the implant level• Tighten using a 1.2 hex driver• The gingival height is 0.5mm...

• Abutment designed for creating cement-retained or combination prostheses• Utilized to modify the contour of abutment margins• Impressions taken at the implant level• Tighten using a 1.2 hex driver• The gingival height is 0.5mm...

• Components for implant level impression using an Closed Tray method.• Features a stable triangular arc structure for secure fastening and precise repositioning.• Tighten with a 1.2 hex hand driver.• The gingival height is 0.5mm...

• Components for implant level impression using an Closed Tray method.• Features a stable triangular arc structure for secure fastening and precise repositioning.• Tighten with a 1.2 hex hand driver.• The gingival height is 0.5mm...

• Components for implant level impression using an Closed Tray method.• Features a stable triangular arc structure for secure fastening and precise repositioning.• Tighten with a 1.2 hex hand driver.• The gingival height is 0.5mm...

• Components for implant level impression using an Closed Tray method.• Features a stable triangular arc structure for secure fastening and precise repositioning.• Tighten with a 1.2 hex hand driver.• The gingival height is 0.5mm...

• Components for implant level impression using an Closed Tray method.• Features a stable triangular arc structure for secure fastening and precise repositioning.• Tighten with a 1.2 hex hand driver.• The gingival height is 0.5mm...

• Abutment for cement-retained/combination prosthesis at implant level impression• Abutment level impression is available using the rigid impression coping (Ø4.0 excluded)• EK abutment holding system simplifies abutment seating when...

• Components for implant level impression using an Open Tray method.• Ensures precise positioning of the internal hex in the impression material.• Tighten with a 1.2 hex hand driver• Packing unit: Impression coping body + guide pin...

• Components for implant level impression using an Open Tray method.• Ensures precise positioning of the internal hex in the impression material.• Tighten with a 1.2 hex hand driver• Packing unit: Impression coping body + guide pin...

• Components for implant level impression using an Open Tray method.• Ensures precise positioning of the internal hex in the impression material.• Tighten with a 1.2 hex hand driver• Packing unit: Impression coping body + guide pin...

• Components for implant level impression using an Open Tray method.• Ensures precise positioning of the internal hex in the impression material.• Tighten with a 1.2 hex hand driver• Packing unit: Impression coping body + guide pin...

• Components for implant level impression using an Open Tray method.• Ensures precise positioning of the internal hex in the impression material.• Tighten with a 1.2 hex hand driver• Packing unit: Impression coping body + guide pin...

• Abutment for cement-retained/combination prosthesis at implant level impression• Abutment level impression is available using the rigid impression coping (Ø4.0 excluded)• EK abutment holding system simplifies abutment seating when...

• Abutment for cement-retained/combination prosthesis at implant level impression• Abutment level impression is available using the rigid impression coping (Ø4.0 excluded)• EK abutment holding system simplifies abutment seating when...

• Abutment for cement-retained/combination prosthesis at implant level impression• Abutment level impression is available using the rigid impression coping (Ø4.0 excluded)• EK abutment holding system simplifies abutment seating when...

• Abutment for cement-retained/combination prosthesis at implant level impression• Abutment level impression is available using the rigid impression coping (Ø4.0 excluded)• EK abutment holding system simplifies abutment seating when...