Ø7.0 EK Transfer Abutment
SKU
Select required options
• Abutment for cement-retained/combination prosthesis at implant level impression
• Abutment level impression is available using the rigid impression coping (Ø4.0 excluded)
• EK abutment holding system simplifies abutment seating when engaging an abutment in the maxilla with a single hand
• Torque using a 1.2 hex driver
• Recommended tightening torque: 30Ncm
• The gingiva height is 0.5mm higher when engaged in Ø3.5 implant
• Packing unit: Abutment + Ti Screw
