Description

• Abutment for cement-retained/combination prosthesis at implant level impression
• Abutment level impression is available using the rigid impression coping (Ø4.0 excluded)
• EK abutment holding system simplifies abutment seating when engaging an abutment in the maxilla with a single hand
• Torque using a 1.2 hex driver
• Recommended tightening torque: 30Ncm
• The gingiva height is 0.5mm higher when engaged in Ø3.5 implant
• Packing unit: Abutment + Ti Screw

View AllClose

Additional Information

Manufacturer:	Hiossen
System:	Exceptional Key (EK)
Product Category:	Transfer Abutment
Impression:	Implant Level
Packing Unit:	Abutment + Ti Screw
Recommended Tightening Torque:	30Ncm

View AllClose

Ø5.0 EK Angled Abutment

• Abutment designed for creating cement-retained or combination prostheses• Compensates for implant insertion angles up to 23° without requiring removal• Suitable for implant-level...

Ø5.0 EK Healing Abutment

• Hand tighten it with a 1.2 hex driver• The gingiva height is 0.5mm higher when engaged in Ø3.5 implant

Ø5.0 EK Rigid Abutment

• Cement-retained prosthesis• Abutment level impression• Ø4.0: torque using the outer driver (code: HORDML/HORDMS)• Ø4.5/5.0/6.0: torque using the outer driver or 1.2 hex driver• Ø7.0: torque using...

Ø5.0 Regular ET Transfer Abutment

• Cement-retained/combination type• Implant level impression• Abutment level impression is available using the rigid impression coping (Ø4.0 excluded)• Torque using a 1.2 hex driver• Recommended...

Ø5.0 EK Transfer Abutment