Hiossen

• Components for Implant level impression with Open tray• Delivery of accurate internal hex position in the impression material• Tighten with a 1.2 hex hand driver• Packing unit:...

• Components for implant level impression using an Open Tray method.• Ensures precise positioning of the internal hex in the impression material.• Tighten with a 1.2 hex hand...

• Components for implant level impression using an Open Tray method.• Ensures precise positioning of the internal hex in the impression material.• Tighten with a 1.2 hex hand...

• Components for implant level impression using an Open Tray method.• Ensures precise positioning of the internal hex in the impression material.• Tighten with a 1.2 hex hand...

• Components for implant level impression using an Open Tray method.• Ensures precise positioning of the internal hex in the impression material.• Tighten with a 1.2 hex hand...

• Components for implant level impression using an Open Tray method.• Ensures precise positioning of the internal hex in the impression material.• Tighten with a 1.2 hex hand...

• Reduced diameter of shank compared to the Torque Driver (Ø2.1 → 1.6)• The diameter of the screw hole can be minimized during prosthetic repair or SCRP procedures

• Driver for torque wrench• No holding function• Recommended tightening torque: 30Ncm (excessive torque causes fracture)• Do not remove tube to prevent fragmentation when...

• Driver for torque wrench• Tip holding function• May bend or break if excessive torque is applied• Damage is possible even at low torque if not fully engaged• Apply...

• Manual driver• Tip holding function (except internal hex type)• Internal hex type length: 11mm

•Use in drilling before inserting the tenting screw•Hard bone : Ø 1.5 / normal, soft bone : Ø 1.0 drill•Laser marking : 1, 2, 3, 4, 5, 6, 7, and 8mm marking...