Hiossen
-
Repair Torque Driver
• Reduced diameter of shank compared to the Torque Driver (Ø2.1 → 1.6)• The diameter of the screw hole can be minimized during prosthetic repair or SCRP procedures -
Angled Torque Driver
• Driver for torque wrench• No holding function• Recommended tightening torque: 30Ncm (excessive torque causes fracture)• Do not remove tube to prevent fragmentation when... -
Torque Driver
• Driver for torque wrench• Tip holding function• May bend or break if excessive torque is applied• Damage is possible even at low torque if not fully engaged• Apply... -
Hand Driver
• Manual driver• Tip holding function (except internal hex type)• Internal hex type length: 11mm