Zest Dental Solutions

Improved Organization and Productivity Removes anxiety around what to buy to get started with LOCATOR or LOCATOR FIXED Easier Inventory Management Improved Accessibility Reference labels that allow...

• Maintain overall user familiarity and processing techniques• All-in-one packaging (Abutment, Denture Attachment Housing, Retention Inserts, Block-out Spacer)• Angle correction up to...

• Maintain overall user familiarity and processing techniques• All-in-one packaging (Abutment, Denture Attachment Housing, Retention Inserts, Block-out Spacer)• Angle correction up to...

• Maintain overall user familiarity and processing techniques• All-in-one packaging (Abutment, Denture Attachment Housing, Retention Inserts, Block-out Spacer)• Angle correction up to...

  • Genuine Zest Anchors abutment• Angle compensation up to 40°• 1.5mm lower profile with various attachments for stable retention force• Torque using a Locator Outer...

  • Genuine Zest Anchors abutment• Angle compensation up to 40°• 1.5mm lower profile with various attachments for stable retention force• Torque using a Locator Outer...

  • Genuine Zest Anchors abutment• Angle compensation up to 40°• 1.5mm lower profile with various attachments for stable retention force• Torque using a Locator Outer...

• Designed for ease of use and predictability when processing attachments into full and partialoverdentures, using either a chairside or laboratory procedure 18mL Cartridge• 18ml...

• Designed for ease of use and predictability when processing attachments into full and partialoverdentures, using either a chairside or laboratory procedure 4mL Syringe• 4ml Syringe and...

• Used only for insertion and removal of the Retention and Processing Inserts

• The pre-inserted Black Processing Insert is used during the pick-up and try-inprocesses• Packing unit: 4ea

• Permanently attached into the overdenture allowing the Retention Inserts to pivot during insertion and removal• Packing unit: 4ea

• Used to transfer the position of the abutment from the mouth into the model

• Inserted into the Impression Coping• Packaged in three dimensions to accommodate smaller and larger sized implants

• Blocks out undercut areas immediately• Surrounds the abutment• Keeps the rim of the Denture Attachment Housing clean during the pick-up

• Creates a recess in the overdenture• Allows the Denture Attachment Housing to be seated without any interference• Along with the surrounding overdenture acrylic.

• Nylon Inserts pivot within the Denture Attachment Housing during the insertion and removal of the overdenture• Packing unit: 4ea

• Tighten the seating or removal tip on the Locator FIXED® Seating and Removal tool from spinning

• Used to tighten or loosen the wire loop in the LOCATOR FIXED® Removal Tip

• Replacement removal tip for the LOCATOR FIXED® Seating and Removal Tool.