Torque Wrench - Bar Type (30 Ncm)

SKU:
TQWCB

Description

• Used to adjust the implant location or tighten abutment, screw, etc.
• Apply torque by pulling bar to the line indicationg the torque value
• Applies up to 30Ncm of torque (markers at 10/20/30Ncm)

View AllClose

Additional Information

Alternate SKUs:
TW30B
View AllClose

Related Products

Torque Wrench (400 Ncm) Torque Wrench (400 Ncm)
Quick view

Torque Wrench (400 Ncm)

• Tightens Screw Driver and removes the implant using the Remover Body• Applies up to 400Ncm of torque (markers at 80/100/200/300/400Ncm)• Torque by pulling the bar back until it reaches the desired...
Torque Driver
Quick view

Torque Driver

• Driver for torque wrench• Tip holding function• May bend or break if excessive torque is applied• Damage is possible even at low torque if not fully engaged• Apply vertical pressure when applying...
Angled Torque Driver
Quick view

Angled Torque Driver

• Driver for torque wrench• No holding function• Recommended tightening torque: 30Ncm (excessive torque causes fracture)• Do not remove tube to prevent fragmentation when broken• Recommended number...