Convertible Abutment

Abutment Screw for Convertible Abutment

• Screw-retained prosthesis in multiple scenarios• Angle compensation up to 60°• Torque using convertible abutment outer driver    - Ø4.0: torque using o-ring abutment driver (code: AORD)    - Ø5.0/6...

• Screw-retained prosthesis in multiple scenarios• Angle compensation up to 60°• Torque using convertible abutment outer driver    - Ø4.0: torque using o-ring abutment driver (code: AORD)    - Ø5.0/6...

• Screw-retained prosthesis in multiple scenarios• Angle compensation up to 60°• Torque using convertible abutment outer driver    - Ø4.0: torque using o-ring abutment driver (code: AORD)    - Ø5.0/6...

• Screw-retained prosthesis in multiple scenarios• Angle compensation up to 60°• Torque using convertible abutment outer driver    - Ø4.0: torque using o-ring abutment driver (code: AORD)    - Ø5.0/6...

• Protects GoldCast/plastic cylinder joints duringpolishing process• Tighten with a 1.2 hex hand driver

• Protects GoldCast/plastic cylinder joints duringpolishing process• Tighten with a 1.2 hex hand driver

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + EbonyGold screw

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + EbonyGold screw

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + EbonyGold screw

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + EbonyGold screw

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + EbonyGold screw

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + EbonyGold screw

• Transfer impression coping• Connected with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin

• Transfer impression coping• Connected with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin

• Components for implant level impression• A pick-up impression coping• Tighten with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin(*)

• Components for implant level impression• A pick-up impression coping• Tighten with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin(*)

• Components for implant level impression• A pick-up impression coping• Tighten with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin(*)

• Screw-retained prosthesis• Customized prosthesis cast with non-precious alloys• Torque using a 1.2 hex driver• Packing unit: cylinder + Ebony-gold cylinder screw

• Screw-retained prosthesis• Customized prosthesis cast with non-precious alloys• Torque using a 1.2 hex driver• Packing unit: cylinder + Ebony-gold cylinder screw

• Screw-retained prosthesis• Customized prosthesis cast with non-precious alloys• Torque using a 1.2 hex driver• Packing unit: cylinder + Ebony-gold cylinder screw

• Provisional prosthesis (Ti Gr-3)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• Provisional prosthesis (Ti Gr-3)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• Provisional prosthesis (Ti Gr-3)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• Screw-retained prosthesis• Customized prosthesis cast with gold alloy• Cylinder melting point: 1400~1450°C (2552~2642°F)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder...

• Screw-retained prosthesis• Customized prosthesis cast with gold alloy• Cylinder melting point: 1400~1450°C (2552~2642°F)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder...

• Screw-retained prosthesis• Customized prosthesis cast with gold alloy• Cylinder melting point: 1400~1450°C (2552~2642°F)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder...

• Combination-retained prosthesis possible• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + EbonyGold cylinder screw

• Combination-retained prosthesis possible• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + EbonyGold cylinder screw