ET / TS System

• Used for selecting Angled Abutment A or B type, diameter, and G/H when in oral cavity or in a working model

• Used for selecting Angled Abutment A or B type, diameter, and G/H when in oral cavity or in a working model

• Lab analog for implant level impressions• Select appropriate size according to the implant size

• Waxing screw: longer screw for making screw-type prosthesis and transfer jigs

• Lab screw: abutment screw for lab work

• Components for Implant level impression with closed tray• Triangular arc ensures accurate placement• Tighten with a 1.2 hex hand driver• Packing unit- Hex: impression coping body + guide pin- Non-hex: impression coping as one piece

• Components for Implant level impression with closed tray• Triangular arc ensures accurate placement• Tighten with a 1.2 hex hand driver• Packing unit- Hex: impression coping body + guide pin- Non-hex: impression coping as one piece

• Components for Implant level impression with closed tray• Triangular arc ensures accurate placement• Tighten with a 1.2 hex hand driver• Packing unit- Hex: impression coping body + guide pin- Non-hex: impression coping as one piece

• Components for Implant level impression with closed tray• Triangular arc ensures accurate placement• Tighten with a 1.2 hex hand driver• Packing unit- Hex: impression coping body + guide pin- Non-hex: impression coping as one piece

• Components for Implant level impression with closed tray• Triangular arc ensures accurate placement• Tighten with a 1.2 hex hand driver• Packing unit- Hex: impression coping body + guide pin- Non-hex: impression coping as one piece

Transfer and tighten the scan healing abutment Use dependent on the body diameter

Healing abutment with scan body function Specifications are identified by the indents on the abutment head Abutment level impression Has a dedicated driver integrated carrier to tighten 1.2 hex driver / driver integrated carrier Packing unit: scan...

• ET Pick-up (Open Tray) Impression Coping Guide Pin • Mini 11mm Impression Coping with 9mm Guide pin = Mini 15mm Impression Coping with 5mm Guide pin • Regular 11mm Impression Coping with 9mm Guide pin = Regular 15mm Impression Coping...

• Components for Implant level impression with Open tray• Delivery of accurate internal hex position in the impression material• Tighten with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin

• Components for Implant level impression with Open tray• Delivery of accurate internal hex position in the impression material• Tighten with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin

• Components for Implant level impression with Open tray• Delivery of accurate internal hex position in the impression material• Tighten with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin

• Components for Implant level impression with Open tray• Delivery of accurate internal hex position in the impression material• Tighten with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin

• Components for Implant level impression with Open tray• Delivery of accurate internal hex position in the impression material• Tighten with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin

• Connected to implant to check the bite impression• Tighten with a 1.2 hex hand driver• Packing unit: 2ea

• The gingival height is 0.5mm higher when engaged in Ø3.5 implant• Attached to the implant to verify bite impression.• Tighten with a 1.2 hex hand driver• Packing unit: 2ea

• Implant level components for impression• Impression and bite registration can be made at the same time• Procedure is same as transfer impression coping• Used with Bite impression coping driver

• Implant level components for impression• Impression and bite registration can be made at the same time• Procedure is same as transfer impression coping• Used with Bite impression coping driver

• Cement-retained prosthesis• Abutment level impression• Ø4.0: torque with the outer driver (code: HORDML/HORDMS)• Ø4.5/5.0/6.0: torque with the outer driver or 1.2 hex driver• Ø7.0: torque with a 1.2 hex...

• Cement-retained prosthesis• Abutment level impression• Ø4.0: torque with the outer driver (code: HORDML/HORDMS)• Ø4.5/5.0/6.0: torque with the outer driver or 1.2 hex driver• Ø7.0: torque with a 1.2 hex...

• Cement-retained prosthesis• Abutment level impression• Ø4.0: torque with the outer driver (code: HORDML/HORDMS)• Ø4.5/5.0/6.0: torque with the outer driver or 1.2 hex driver• Ø7.0: torque with a 1.2 hex...

Digital Lab Analog is designed to be used with 3D printed models to check for proper position and custom abutment specifications. Used with Digital Lab Analog Placement Tools to allow the analog to be placed in the 3D Model easily. Tighten with a 1.2...