Prosthetics

Abutment Screw for Convertible Abutment

Abutment Screw

• Cylinder screw that can be used for   - Esthetic-low Gold Cylinder   - Esthetic-low Plastic Cylinder   - Esthetic-low Temporary Cylinder

• Protects GoldCast/plastic cylinder joints duringpolishing process• Tighten with a 1.2 hex hand driver

• Protects GoldCast/plastic cylinder joints duringpolishing process• Tighten with a 1.2 hex hand driver

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + EbonyGold screw

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + EbonyGold screw

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + EbonyGold screw

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + EbonyGold screw

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + EbonyGold screw

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + EbonyGold screw

• Transfer impression coping• Connected with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin

• Transfer impression coping• Connected with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin

• Components for implant level impression• A pick-up impression coping• Tighten with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin(*)

• Components for implant level impression• A pick-up impression coping• Tighten with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin(*)

• Components for implant level impression• A pick-up impression coping• Tighten with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin(*)

• Screw-retained prosthesis• Customized prosthesis cast with non-precious alloys• Torque using a 1.2 hex driver• Packing unit: cylinder + Ebony-gold cylinder screw

• Screw-retained prosthesis• Customized prosthesis cast with non-precious alloys• Torque using a 1.2 hex driver• Packing unit: cylinder + Ebony-gold cylinder screw

• Screw-retained prosthesis• Customized prosthesis cast with non-precious alloys• Torque using a 1.2 hex driver• Packing unit: cylinder + Ebony-gold cylinder screw

• Provisional prosthesis (Ti Gr-3)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• Provisional prosthesis (Ti Gr-3)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• Provisional prosthesis (Ti Gr-3)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• Screw-retained prosthesis• Customized prosthesis cast with gold alloy• Cylinder melting point: 1400~1450°C (2552~2642°F)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder...

• Screw-retained prosthesis• Customized prosthesis cast with gold alloy• Cylinder melting point: 1400~1450°C (2552~2642°F)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder...

• Screw-retained prosthesis• Customized prosthesis cast with gold alloy• Cylinder melting point: 1400~1450°C (2552~2642°F)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder...

• Combination-retained prosthesis possible• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + EbonyGold cylinder screw

• Combination-retained prosthesis possible• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + EbonyGold cylinder screw

• ET multi abutment combination with multiple prosthetic options• Non-hex type• Torque using a 1.2 hex driver

• Multi Ti-Base abutment combination for multiple prosthetic options• Used in combination with ET Multi Scan Body• Abutment level impression• Non-hex type• Torque using a 1.2 hex driver• Recommended tightening torque:...

• Protects GoldCast/plastic cylinder joints during polishing process• Tighten with a 1.2 hex hand driver

• Transfer impression coping for esthetic-low abutment• Connected with a 1.2 hex hand driver

• Transfer impression coping for esthetic-low abutment• Connected with a 1.2 hex hand driver

• Guide pin for Esthetic-low Pick-up Impression Coping

• Components for implant level impression taking• Pick up impression coping for esthetic-low abutment• Tighten with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin(*)

Narrow Type • Used in fabricating a temporary prosthesis (Ti Gr-3)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• A protective cap• Tighten with a 1.2 hex hand driver

• Cast with non-precious metal alloys• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• Screw-retained prosthesis• Cast with gold alloys• Cylinder melting point: 1400~1450°C (2552~2642°F)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• Used for producing combination prosthesis in multi abutment• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw• Multi angled abutment can be used (Non-Hex)

• Used for selecting Angled Abutment A or B type, diameter, and G/H when in oral cavity or in a working model