Prosthetics

• Solid abutment components that reproduce them on the model after impression taking• Sophisticated prosthesis can be produced inside• After casting, remove the lower part of the margin holding part

• Protects the rigid abutment until applying the final prosthesis• Can be used as the base for a provisional crown• Available for transfer abutment (Ø4.0 excluded)

• Abutment for cement-retained/combination prosthesis at implant level impression• Abutment level impression is available using the rigid impression coping (Ø4.0 excluded)• EK abutment holding system simplifies abutment seating when...

• Abutment for cement-retained/combination prosthesis at implant level impression• Abutment level impression is available using the rigid impression coping (Ø4.0 excluded)• EK abutment holding system simplifies abutment seating when...

• Abutment for cement-retained/combination prosthesis at implant level impression• Abutment level impression is available using the rigid impression coping (Ø4.0 excluded)• EK abutment holding system simplifies abutment seating when...

  • Cement-retained prosthesis• Abutment level impression• Ø4.0: torque using the outer driver (code: HORDML/HORDMS)• Ø4.5/5.0/6.0: torque using the outer driver or 1.2 hex driver• Ø7.0: torque using a 1...

• Components that replace resin caps before wax up using solid abutments• Used in the same color as solid impression coping

• Components that replace resin caps before wax up using solid abutments• Used in the same color as solid impression coping

• Components for solid abutment impression• Possibility of precise prosthesis using lab analog• Color coded by abutment height

• Components for solid abutment impression• Possibility of precise prosthesis using lab analog• Color coded by abutment height

• Protects the solid abutment and minimizes patient irritation• Can be used as the base for a provisional crown

• Protects the solid abutment and minimizes patient irritation• Can be used as the base for a provisional crown

  • Depending on the depth of the implant, choose the height (H) of the cover screw• Hand tighten it with 1.2 hex driver

  • Depending on the depth of the implant, choose the height (H) of the cover screw• Hand tighten it with 1.2 hex driver