Prosthetics

Narrow Type • Used in fabricating a temporary prosthesis (Ti Gr-3)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• A protective cap• Tighten with a 1.2 hex hand driver

• A pick up impression coping for octa abutment• Tighten with a 1.2 hex hand driver• Packing unit:impression coping body + guide pin(*)

• A pick up impression coping for octa abutment• Tighten with a 1.2 hex hand driver• Packing unit:impression coping body + guide pin(*)

• Screw-retained prosthesis• Customized prosthesis cast with non-precious alloys• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• Screw-retained prosthesis• Customized prosthesis cast with non-precious alloys• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• Provisional prosthesis (Ti Gr-3)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• Provisional prosthesis (Ti Gr-3)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• Screw-retained prosthesis• Customized prosthesis cast with gold alloy• Cylinder melting point: 1400-1450°C (2552~2642°F)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder...

• Screw-retained prosthesis• Customized prosthesis cast with gold alloy• Cylinder melting point: 1400-1450°C (2552~2642°F)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder...

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + Ti Screw

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + Ti Screw

• Lab analog• Tighten with a 1.2 hex hand driver

• Lab analog• Tighten with a 1.2 hex hand driver

• Hand tightened with a 1.2 hex driver• Packing unit: Impression coping body + Guide pin

• Hand tightened with a 1.2 hex driver• Packing unit: Impression coping body + Guide pin

• Components for implant level impression taking• For open tray impressions• Unique design that is fixed position in the impression material• Connect with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin(*)

• Screw-retained prosthesis for multiple prosthetic options• Shares the same platform as the multi-angled abutment• Restorative components: US aesthetic low cylinder (regular/non-hex)• Torque using multi abutment outer driver...

• Screw-retained prosthesis for multiple prosthetic options• Shares the same platform as the multi-angled abutment• Restorative components: US aesthetic low cylinder (regular/non-hex)• Torque using multi abutment outer driver...

• Components for implant level impression taking• For open tray impressions• Unique design that is fixed position in the impression material• Connect with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin(*)

• Components for implant level impression taking• For open tray impressions• Unique design that is fixed position in the impression material• Connect with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin(*)

• Protects ComOcta abutment final prosthesis• Can be used as a temporary crown base• Excellent Solid Protect Cap can substitute for wide type

• An impression cap used when the solid abutment is trimmed• Used with a solid shoulder analog and analog pin

• Cement/screw-retained temporary prosthesis• Utilized for producing provisional prostheses after prepping• Impressions taken at the implant level• Torqued using a 1.2 hex driver• Recommended torque for tightening: 20Ncm•...

• Cement/screw-retained temporary prosthesis• Utilized for producing provisional prostheses after prepping• Impressions taken at the implant level• Torqued using a 1.2 hex driver• Recommended torque for tightening: 20Ncm•...

• Abutment designed for creating screw-retained prostheses• Used for producing customized casting prosthesis through non-precious alloy• Melting temperature of abutment: 1,400~1,450°C (2552~2822°F)• Impressions taken at the...

• Abutment designed for creating screw-retained prostheses• Used for producing customized casting prosthesis through non-precious alloy• Melting temperature of abutment: 1,400~1,450°C (2552~2822°F)• Impressions taken at the...

• Abutment designed for creating cement-retained or combination prostheses• Used for producing customized prosthesis through gold alloy casting.• Melting temperature of abutment: 1,400~1,450°C (2552~2822°F)• Impressions taken...

• Abutment designed for creating cement-retained or combination prostheses• Used for producing customized prosthesis through gold alloy casting.• Melting temperature of abutment: 1,400~1,450°C (2552~2822°F)• Impressions taken...

• An impression cap used when the solid abutment is trimmed• Used with a solid shoulder analog and analog pin

• Excellent solid abutment components that reproduce this on the model after impression taking• Sophisticated prosthesis can be produced inside• After casting, remove the lower part of the margin holding part

• Excellent solid abutment components that reproduce this on the model after impression taking• Sophisticated prosthesis can be produced inside• After casting, remove the lower part of the margin holding part

• Components that replace resin caps before wax up using solid abutments• Used in the same color as solid impression coping

• Components that replace resin caps before wax up using solid abutments• Used in the same color as solid impression coping

• Impression components for Excellent solid abutment• Possibility of precise prosthesis using lab analog• Color coded by abutment height

• Impression components for Excellent solid abutment• Possibility of precise prosthesis using lab analog• Color coded by abutment height

• Cast with non-precious metal alloys• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• Screw-retained prosthesis• Cast with gold alloys• Cylinder melting point: 1400~1450°C (2552~2642°F)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• Used for producing combination prosthesis in multi abutment• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw• Multi angled abutment can be used (Non-Hex)

• Abutment designed for creating cement-retained or combination prostheses• Utilized to modify the contour of abutment margins• Impressions taken at the implant level• Tighten using a 1.2 hex driver• The gingival height is 0.5mm...