Prosthetics

• Screw-retained prosthesis• Customized prosthesis cast with gold alloy• Cylinder melting point: 1400-1450°C (2552~2642°F)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder...

• Screw-retained prosthesis• Customized prosthesis cast with gold alloy• Cylinder melting point: 1400-1450°C (2552~2642°F)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder...

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + Ti Screw

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + Ti Screw

• Lab analog• Tighten with a 1.2 hex hand driver

• Lab analog• Tighten with a 1.2 hex hand driver

• Hand tightened with a 1.2 hex driver• Packing unit: Impression coping body + Guide pin

• Screw-retained prosthesis for multiple prosthetic options• Same platform as the multi abutment• Restorative components: US esthetic low cylinder (regular/non-hex)• Abutment screw included• Torque using a 1.2 hex driver•...

• Screw-retained prosthesis for multiple prosthetic options• Same platform as the multi abutment• Restorative components: US esthetic low cylinder (regular/non-hex)• Abutment screw included• Torque using a 1.2 hex driver•...

• Hand tightened with a 1.2 hex driver• Packing unit: Impression coping body + Guide pin

• Components for implant level impression taking• For open tray impressions• Unique design that is fixed position in the impression material• Connect with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin(*)

• Screw-retained prosthesis for multiple prosthetic options• Same platform as the multi angled abutment• Restorative components: US esthetic low cylinder (regular/non-hex)• Torque using multi abutment outer driver (code: MAOD)•...

• Screw-retained prosthesis for multiple prosthetic options• Same platform as the multi angled abutment• Restorative components: US esthetic low cylinder (regular/non-hex)• Torque using multi abutment outer driver (code: MAOD)•...

• Components for implant level impression taking• For open tray impressions• Unique design that is fixed position in the impression material• Connect with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin(*)

• Components for implant level impression taking• For open tray impressions• Unique design that is fixed position in the impression material• Connect with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin(*)

• Cement/screw-retained type prosthesis • A provisional prosthesis used after immediate loading• Easy to prep or add resin• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm(mini/regular)• Packing...

• Cement/screw-retained type prosthesis • A provisional prosthesis used after immediate loading• Easy to prep or add resin• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm(mini/regular)• Packing...

• Protects ComOcta abutment final prosthesis• Can be used as a temporary crown base• Excellent Solid Protect Cap can substitute for wide type

• Cement/Screw-retained type for temporary prosthesis• Used to make temporary prosthesis after prep• Implant level impression• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm(mini/regular)• Packing unit:...

• Cement/Screw-retained type for temporary prosthesis• Used to make temporary prosthesis after prep• Implant level impression• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm(mini/regular)• Packing unit:...

• An impression cap used when the solid abutment is trimmed• Used with a solid shoulder analog and analog pin

• Abutment designed for creating screw-retained prostheses• Used for producing customized casting prosthesis through non-precious alloy• Melting temperature of abutment: 1,400~1,450°C (2552~2822°F)• Impressions taken at the...

• Abutment designed for creating screw-retained prostheses• Used for producing customized casting prosthesis through non-precious alloy• Melting temperature of abutment: 1,400~1,450°C (2552~2822°F)• Impressions taken at the...

• Abutment designed for creating cement-retained or combination prostheses• Used for producing customized prosthesis through gold alloy casting.• Melting temperature of abutment: 1,400~1,450°C (2552~2822°F)• Impressions taken...

• Abutment designed for creating cement-retained or combination prostheses• Used for producing customized prosthesis through gold alloy casting.• Melting temperature of abutment: 1,400~1,450°C (2552~2822°F)• Impressions taken...

• An impression cap used when the solid abutment is trimmed• Used with a solid shoulder analog and analog pin

• Excellent solid abutment components that reproduce this on the model after impression taking• Sophisticated prosthesis can be produced inside• After casting, remove the lower part of the margin holding part

• Excellent solid abutment components that reproduce this on the model after impression taking• Sophisticated prosthesis can be produced inside• After casting, remove the lower part of the margin holding part

• Components that replace resin caps before wax up using solid abutments• Used in the same color as solid impression coping

• Components that replace resin caps before wax up using solid abutments• Used in the same color as solid impression coping

• Impression components for Excellent solid abutment• Possibility of precise prosthesis using lab analog• Color coded by abutment height

• Impression components for Excellent solid abutment• Possibility of precise prosthesis using lab analog• Color coded by abutment height

• Cement-retained/combination type prosthesis• Customized margins can be contoured as needed• Implant level impression• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm(mini), 30Ncm(regular)• Packing...

• Cement-retained/combination type prosthesis• Customized margins can be contoured as needed• Implant level impression• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm(mini), 30Ncm(regular)• Packing...

• Cement-retained/combination type prosthesis• Customized margins can be contoured as needed• Implant level impression• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm(mini), 30Ncm(regular)• Packing...

• Protects the solid abutment and minimizes patient irritation• Can be used as the base for a provisional crown

• Protects the solid abutment and minimizes patient irritation• Can be used as the base for a provisional crown

• An impression coping component used when the solid abutment is trimmed• Reinforces the narrow part of the abutment• Used with a solid shoulder analog and impression cap

• An impression coping component used when the solid abutment is trimmed• Reinforces the narrow part of the abutment• Used with a solid shoulder analog and impression cap

• Impression product used when removing solid abutment• Reproducing the platform part of the implant in the work model• Used with solid impression cap and shoulder analog pin