Prosthetics

  • Contains- 1 Gold LOCATOR FIXED® Denture Housing- 1 Green or Blue or Tan LOCATOR FIXED® Insert- 1 LOCATOR ® & Processing Spacer- 1 LOCATOR ® & Black Processing Insert   What are the Green...

  • Insert only• Used in 4 implant fixed, full-arch cases• Green - Cannot be used with LOCATOR FIXED® Blue or Tan inserts• Blue - Used in combination with LOCATOR FIXED® Tan anterior/posterior insert• Tan - Used in...

  • Insert only• Used in 4 implant fixed, full-arch cases• Green - Cannot be used with LOCATOR FIXED® Blue or Tan inserts• Blue - Used in combination with LOCATOR FIXED® Tan anterior/posterior insert• Tan - Used in...

• One streamlined tool compatible with LOCATOR Removable and LOCATOR FIXED Inserts• Two-sided instrument designed for easy insertion and removal of any LOCATOR Insert- Insertion Tip: Effortlessly pickup inserts for transfer and placement in...

• Locator torque driver

• Places and removes nylon retentive males in the denture cap• Divides into three separate tools: includes a hand driver for locator abutment

• A lab analog for locator abutment• Packing unit: 4ea

• Block-out spacers used on the heads of the locator abutments.• Seals gap between denture cap and abutment• Packing unit: 20ea

• Represent the placement and performance of LOCATOR housing and processing components in dental impressions• Packing unit: 4ea

• A nylon male used in prosthesis fabrication process• Packing unit: 4ea

• Retention force: - Red: approx. 6N- Green: approx. 12N• Angle compensation up to 20~40°• Packing unit: 4ea

• Retention force: - Blue: approx. 6N- Pink: approx. 12N- Clear: approx. 22N• Angle compensation up to 20°• Packing unit: 4ea

• Components- Block out spacer/denture cap, black processing male- Replacement male blue/pink/clear• A full range of retentive males are included with each denture cap to allow personalized retention for each specific patient• Locator...

• Lab analog• Tighten with a 1.2 hex hand driver

• Lab analog• Tighten with a 1.2 hex hand driver

• Hand tightened with a 1.2 hex driver• Packing unit: Impression coping body + Guide pin

• Hand tightened with a 1.2 hex driver• Packing unit: Impression coping body + Guide pin

• A pick up impression copingfor octa abutment• Tighten with a 1.2 hex hand driver• Packing unit:impression coping body + guide pin(*)

• A pick up impression coping for octa abutment• Tighten with a 1.2 hex hand driver• Packing unit:impression coping body + guide pin(*)

• A pick up impression coping for octa abutment• Tighten with a 1.2 hex hand driver• Packing unit:impression coping body + guide pin(*)

• Screw-retained prosthesis• Customized prosthesis cast with non-precious alloys• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• Screw-retained prosthesis• Customized prosthesis cast with non-precious alloys• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• Provisional prosthesis (Ti Gr-3)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• Provisional prosthesis (Ti Gr-3)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• Screw-retained prosthesis• Customized prosthesis cast with gold alloy• Cylinder melting point: 1400-1450°C (2552~2642°F)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder...

• Screw-retained prosthesis• Customized prosthesis cast with gold alloy• Cylinder melting point: 1400-1450°C (2552~2642°F)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder...

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + Ti Screw

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + Ti Screw

• Lab analog• Tighten with a 1.2 hex hand driver

• Lab analog• Tighten with a 1.2 hex hand driver

• Hand tightened with a 1.2 hex driver• Packing unit: Impression coping body + Guide pin

• Hand tightened with a 1.2 hex driver• Packing unit: Impression coping body + Guide pin

• Components for implant level impression taking• For open tray impressions• Unique design that is fixed position in the impression material• Connect with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin(*)

• Components for implant level impression taking• For open tray impressions• Unique design that is fixed position in the impression material• Connect with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin(*)

• Components for implant level impression taking• For open tray impressions• Unique design that is fixed position in the impression material• Connect with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin(*)

• Protects ComOcta abutment final prosthesis• Can be used as a temporary crown base• Excellent Solid Protect Cap can substitute for wide type

• An impression cap used when the solid abutment is trimmed• Used with a solid shoulder analog and analog pin

• An impression cap used when the solid abutment is trimmed• Used with a solid shoulder analog and analog pin

• Excellent solid abutment components that reproduce this on the model after impression taking• Sophisticated prosthesis can be produced inside• After casting, remove the lower part of the margin holding part

• Excellent solid abutment components that reproduce this on the model after impression taking• Sophisticated prosthesis can be produced inside• After casting, remove the lower part of the margin holding part