Description

• Depending on the depth of the implant, choose the height (H) of the cover screw
• Ø3.5 implant used exclusive cover screws
• Hand tighten it with 1.2 hex driver

View AllClose

Additional Information

Manufacturer:	Hiossen
System:	Exceptional Key (EK)
Product Category:	EK Cover Screw

View AllClose

Ø4.0 Remover Screw - Hiossen (EK)

• When securely fastened to the implant, it serves as a supporting structure for the Remover Body• Use the proper type that matches the diameter of the implant to be removed (ET/SS/US,...

Ø4.0 Cover Cap (EK/ET)

•Submerged procedure•Compatible with OB2 and OB3•Tightened with a 0.9 hex hand drive•Recommended tightening torqu??Disposable. Do not reuse

• Cement-retained prosthesis• Abutment level impression• Ø4.0: torque using the outer driver (code: HORDML/HORDMS)• Ø4.5/5.0/6.0: torque using the outer driver or 1.2 hex driver• Ø7.0: torque using...

Ø4.0 EK Angled Abutment

• Abutment designed for creating cement-retained or combination prostheses• Compensates for implant insertion angles up to 23° without requiring removal• Suitable for implant-level...

Ø4.0 EK Temporary Abutment

• Cement/screw-retained temporary prosthesis• Utilized for producing provisional prostheses after prepping• Impressions taken at the implant level• Torqued using a 1.2 hex driver• Recommended torque...

Ø4.0 EK Transfer Abutment

• Abutment for cement-retained/combination prosthesis at implant level impression• Abutment level impression is available using the rigid impression coping (Ø4.0 excluded)• EK abutment holding system...

Ø4.0 EK Healing Abutment

• Hand tighten it with a 1.2 hex driver• The gingiva height is 0.5mm higher when engaged in Ø3.5 implant

Ø4.0 EK NP-Cast Abutment

• Abutment designed for creating screw-retained prostheses• Used for producing customized casting prosthesis through non-precious alloy• Melting temperature of abutment: 1,400~1,450°C (2552~2822°F)•...

Ø4.0 Healing Cap (EK/ET)

Healing Cap (EK / ET)•Non-submerged procedure•Compatible with OB2 and OB3•Tightened with a 0.9 hex hand drive•Recommended tightening torque : 5~8Ncm??Disposable. Do not reuse &nb

Ø4.0 EK Cover Screw

Description

Additional Information

Related Products