OneGuide Kit

  • OneGuide Kit has options for open or closed sleeve   - Open type is recommended for use in posterior with limited space• Two sizes of guide holes depending on the diameter of the fixture   - D5.0 for implant...

• Used to adjust the implant location or tighten abutment, screw, etc.• Apply torque by pulling bar to the line indicationg the torque value• Applies up to 30Ncm of torque (markers at 10/20/30Ncm)

Used for drilling before using anchor screw

Used to affix the OneGuide

• Drill for correcting path deviation during OneGuide surgery• Used for creating implant placement path for extraction cases• Flat blade design optimized for cutting inclined bone• 4 types for each Oneguide hole diameter, 8 types in...

• Used with a wrench for finishing the final implant placement• Yellow groove aligns the abutment hex direction• Match the grooves on the OneGuide template with the grooves on the driver• Sold as an individual item• *P = Platform

Used for placing SS implants

Used with a wrench for finishing the final implant placement

Used for placing EK NoMount implants

Used for placing F4.5 and F5.0 implants in hard bone

Featuring stopper design to prevent entry below the eupper surface of OneGuide hole

Used with a wrench for finishing the final implant placement

Used to place a NoMount implant

Used for fixing OneGuide in place (ie. edentulous cases)

Used for fixing the OneGuide in place (ie. edentulous case)

Used for drilling before OneGuide Anchor

Used to place F3.5 implants in soft bone

Taper drill for OneGuide

Short type initial drill, used for limited intermaxillary space

Used after tissue punch for initial drilling

Used to remove gingiva for flapless surgery

• Releases excessive torque when hand piece does not move due to being stuck in bone during expansion drill removal process.• Use with an open wrench to turn the hex of the Expansion drill • Prevents from over torquing

• Connects to mounted implants for placement• For use with a handpiece/implant motor

• Tightens Screw Driver and removes the implant using the Remover Body• Applies up to 400Ncm of torque (markers at 80/100/200/300/400Ncm)• Torque by pulling the bar back until it reaches the desired torque value marking• Clean and...

  • OneGuide Kit has options for open or closed sleeve   - Open type is recommended for use in posterior with limited space• Two sizes of guide holes depending on the diameter of the fixture   - D5.0 for implant...