OneCAS Kit

• Used to adjust the implant location or tighten abutment, screw, etc.• Apply torque by pulling bar to the line indicationg the torque value• Applies up to 30Ncm of torque (markers at 10/20/30Ncm)

Bone Carrier• Handle for the bone carrier head• Connects the bone carrier head and tighten at the opposite end• Connects both heads (SNBCH30 or SNBCH35)

Checks for internal sinus lift and measures residual bone depth

• Stopper number indicates the length when engaged• On the Kit, protruding length marked in blue for 7mm drills and in red for 10mm drills• Color coded by length• Recommended number of use: 50 times

• Used with the stopper of OneCAS system, safely lifts during maxillary sinus surgery• The membrane is safely lifted during maxillary sinus surgery• Possible to collect autogenous bone at low RPM‘s• Use a stopper for a safe...

• Recommended to drill 1mm under the lower margin of maxillary sinus• Used with a stopper for a safe membrane approach• 1mm shorter than a normal Twist Drill• Recommended speed: 400 ~ 1,200 rpm

Digital Sinus Lift Kit

• Safely pushes bone material through the bone carrier into the sinus cavity• SNBCH30 : use ø1.1• SNBCH35 : use ø1.4

• Tubing to connect the hydraulic membrane lifter to the saline filled syringe

• Tightens Screw Driver and removes the implant using the Remover Body• Applies up to 400Ncm of torque (markers at 80/100/200/300/400Ncm)• Torque by pulling the bar back until it reaches the desired torque value marking• Clean and...