485 Kit

485 Kit Prevents damage to the mandibular nerve Safe drilling even with insufficient vertical bone height 3 Easy and Simple drilling steps  The round shaped drill prevents damage to the mandibular nerve The round tip of the 485 drill helps...

• Used to adjust the implant location or tighten abutment, screw, etc.• Apply torque by pulling bar to the line indicationg the torque value• Applies up to 30Ncm of torque (markers at 10/20/30Ncm)

• Releases excessive torque when hand piece does not move due to being stuck in bone during expansion drill removal process.• Use with an open wrench to turn the hex of the Expansion drill • Prevents from over torquing

• Drill Extension

• Connects to mounted implants for placement• For use with a handpiece/implant motor

• Connects directly to an ET implant for final adjustments to the implant's depth• *C = Connection

ET(TS) NoMount Driver

• Included in 485 Kit• A drill for placing short implants in alveolar bone lacking in vertical dimension• Ø 2.2 drill: straight drill• Except for Ø 2.2 drill, the top blade of the drill is in the shape of CAS Drill, and...

• Included in 485 Kit• A drill for placing short implants in alveolar bone lacking in vertical dimension• Ø 2.2 drill: straight drill• Except for Ø 2.2 drill, the top blade of the drill is in the shape of CAS Drill, and...

• Included in 485 Kit• A drill for placing short implants in alveolar bone lacking in vertical dimension• Ø 2.2 drill: straight drill• Except for Ø 2.2 drill, the top blade of the drill is in the shape of CAS Drill, and...

• Included in 485 Kit• A drill for placing short implants in alveolar bone lacking in vertical dimension• Ø 2.2 drill: straight drill• Except for Ø 2.2 drill, the top blade of the drill is in the shape of CAS Drill, and...

• Included in 485 Kit• A drill for placing short implants in alveolar bone lacking in vertical dimension• Ø 2.2 drill: straight drill• Except for Ø 2.2 drill, the top blade of the drill is in the shape of CAS Drill, and...

• Included in 485 Kit• A drill for placing short implants in alveolar bone lacking in vertical dimension• Ø 2.2 drill: straight drill• Except for Ø 2.2 drill, the top blade of the drill is in the shape of CAS Drill, and...

• Drill for marking location of osteotomy to facilitate initial drilling

• Extends the length of the screw driver and remover body (by 10mm)

• Driver for torque wrench• Tip holding function• May bend or break if excessive torque is applied• Damage is possible even at low torque if not fully engaged• Apply vertical pressure when applying torque driver (Do not...

• Manual driver• Tip holding function (except internal hex type)• Internal hex type length: 11mm