Hiossen Kits

• Connected to the implant to center and prevent shaking of the reverse driver, SR drill and retap• Choose spec of guide according to implant type and diameter (6 overseas companies' internal and submerged type products)• Short or long...

• Connected to the implant to center and prevent shaking of the reverse driver, SR drill and retap• Choose spec of guide according to implant type and diameter (6 overseas companies' internal and submerged type products)• Short or long...

• Connected to the implant to center and prevent shaking of the reverse driver, SR drill and retap• Choose spec of guide according to implant type and diameter (6 overseas companies' internal and submerged type products)• Short or long...

• Used to hold abutments and help deliver them to hard-to-reach sites of the oral cavity

• Stainless Steel Bowl

• Tool used to remove the excess cast after plastic coping is set• For both solid Ø6.0 and excellent solid Ø4.8• P = Platform

• Tool used to remove the excess cast after plastic coping is set• For both solid Ø6.0 and excellent solid Ø4.8• P = Platform

• Tool used to remove the excess cast after plastic coping is set

• Tool used to remove the excess cast after plastic coping is set

• Tool used to remove the excess cast after plastic coping is set

• Tool used to remove the excess cast after plastic coping is set

• Tool used to remove the excess cast after plastic coping is set

• Tool used to remove the excess cast after plastic coping is set Reamer user guide1. Select a reamer tip that is the same size as Abutment size and connect it to the burn-out cylinder2. Firmly grasp the casting body and rotate the Reamer Bite with...

• Connects to the Torque Driver

• Tool used convert a machine driver into a bi-directional connection for the torque wrench

• Tool to check path and measure gingival height after EK implant placement* *C = Connection

• Tool to check path and measure gingival height after ET implant placement* *C = Connection

• Torque driver for Multi-Abutments

• Machine driver for Multi-Abutments

• Driver for Octa Abutments• Recommended tightening torque: 30Ncm

• Driver for Stud Abutment

• Driver for Excellent Solid Abutments• Connect to the solid abutment by matching up the groove with the triangular indicator• Recommended tightening torque: 30Ncm

• Driver specific for solid abutments• Connect to the solid abutment by matching up the groove with the triangular indicator• Recommended tightening torque: 30Ncm

• Driver for Rigid Abutments• Recommended tightening torque: 30Ncm

• Driver for Rigid Abutments• Recommended tightening torque: 30Ncm

• Driver for Rigid Abutments• Recommended tightening torque: 30Ncm

• Driver for Rigid Abutments• Recommended tightening torque: 30Ncm

• It may not be fastened or disconnected when connecting a normal handpiece• Driver should be used after matching the groove or section of the outer triangle and abutment• Solid, excellent solid driver is compatible only with Ø4...

• Reduced diameter of shank compared to the Torque Driver (Ø2.1 → 1.6)• The diameter of the screw hole can be minimized during prosthetic repair or SCRP procedures

• Driver for torque wrench• No holding function• Recommended tightening torque: 30Ncm (excessive torque causes fracture)• Do not remove tube to prevent fragmentation when broken• Recommended number of use: 10 times

• Driver for torque wrench• Tip holding function• May bend or break if excessive torque is applied• Damage is possible even at low torque if not fully engaged• Apply vertical pressure when applying torque driver (Do not...

• Manual driver• Tip holding function (except internal hex type)• Internal hex type length: 11mm

• Driver for engine• Tip holding feature (except internal hex type)• Internal hex type length : 8

•Surgical tool for ejecting the harvested autogenous bone from the stopper

•Stops at a drilling depth of 4mm for harvesting of cortical bone•Stores the autogenous bone harvested from drilling

•Stops at a drilling depth of 4mm for harvesting of cortical bone•Stores the autogenous bone harvested from drilling

•Stops at a drilling depth of 4mm for harvesting of cortical bone•Stores the autogenous bone harvested from drilling

•Stops at a drilling depth of 4mm for harvesting of cortical bone•Stores the autogenous bone harvested from drilling

•Comes in Ø 3.0 to 6.0 in diameter and a Drill + Stopper set•Recommended drilling speed : 300 ~ 600rpm•Use of drill and stopper : 50 times??Before initial drilling, connect the stopper to the first stage locking and...

•Comes in Ø 3.0 to 6.0 in diameter and a Drill + Stopper set•Recommended drilling speed : 300 ~ 600rpm•Use of drill and stopper : 50 times??Before initial drilling, connect the stopper to the first stage locking and...