Ø4.0 EK Temporary Abutment

• Cement/screw-retained temporary prosthesis• Utilized for producing provisional prostheses after prepping• Impressions taken at the implant level• Torqued using a 1.2 hex driver• Recommended torque...

Ø6.0 EK Healing Abutment

• Hand tighten it with a 1.2 hex driver• The gingiva height is 0.5mm higher when engaged in Ø3.5 implant

Ø6.0 EK Rigid Abutment

• Cement-retained prosthesis• Abutment level impression• Ø4.0: torque using the outer driver (code: HORDML/HORDMS)• Ø4.5/5.0/6.0: torque using the outer driver or 1.2 hex driver• Ø7.0: torque using...

Ø4.0 EK Transfer Abutment

• Abutment for cement-retained/combination prosthesis at implant level impression• Abutment level impression is available using the rigid impression coping (Ø4.0 excluded)• EK abutment holding system...

Solid Abutment Driver

• Driver specific for solid abutments• Connect to the solid abutment by matching up the groove with the triangular indicator• Recommended tightening torque: 30Ncm

Abutment Holder

Description