Description

Description

• Driver for torque wrench
• Tip holding function
• May bend or break if excessive torque is applied
• Damage is possible even at low torque if not fully engaged
• Apply vertical pressure when applying torque driver (Do not tilt)
• If the tip is bent or stripped, replace immediately

View AllClose

Torque Driver Handle

• Used for initial insertion by hand after fastening to torque driver

Torque Driver (Denture)

Repair Torque Driver

• Reduced diameter of shank compared to the Torque Driver (Ø2.1 → 1.6)• The diameter of the screw hole can be minimized during prosthetic repair or SCRP procedures

Locator Torque Driver

• Locator torque driver

Angled Torque Driver

• Driver for torque wrench• No holding function• Recommended tightening torque: 30Ncm (excessive torque causes fracture)• Do not remove tube to prevent fragmentation when broken• Recommended number...

Osstem Machine Torque Driver

• It may not be fastened or disconnected when connecting a normal handpiece• Driver should be used after matching the groove or section of the outer triangle and abutment• Solid, excellent solid...