EK System

Digital Lab Analog is designed to be used with 3D printed models to check for proper position and custom abutment specifications. Used with Digital Lab Analog Placement Tools to allow the analog to be placed in the 3D Model easily. Tighten with a 1.2...

• Hand tighten it with a 1.2 hex driver• The gingiva height is 0.5mm higher when engaged in Ø3.5 implant

• Hand tighten it with a 1.2 hex driver• The gingiva height is 0.5mm higher when engaged in Ø3.5 implant

• Hand tighten it with a 1.2 hex driver• The gingiva height is 0.5mm higher when engaged in Ø3.5 implant

• Abutment designed for creating cement-retained or combination prostheses• Compensates for implant insertion angles up to 23° without requiring removal• Suitable for implant-level impressions • Tighten using a 1.2 hex...

• Retains overdenture with O-ring system• Angle compensation up to 20°• Torque using O-ring driver (code: HAORD)• Recommended tightening torque: 30Ncm (mini/regular)• Ball head diameter• Normal size: Ø2.25 (H 3...

• Laboratory screw: This is an abutment screw designed specifically for laboratory tasks

• Waxing screw: utilized in creating screw-type abutments and transfer jigs by extending the screw hole to the upper section

• ET multi abutment combination with multiple prosthetic options• Non-hex type• Torque using a 1.2 hex driver

• Multi Ti-Base abutment combination for multiple prosthetic options• Used in combination with ET Multi Scan Body• Abutment level impression• Non-hex type• Torque using a 1.2 hex driver• Recommended tightening torque:...

• Protects GoldCast/plastic cylinder joints during polishing process• Tighten with a 1.2 hex hand driver

• Transfer impression coping for esthetic-low abutment• Connected with a 1.2 hex hand driver

• Transfer impression coping for esthetic-low abutment• Connected with a 1.2 hex hand driver

• Guide pin for Esthetic-low Pick-up Impression Coping

• Components for implant level impression taking• Pick up impression coping for esthetic-low abutment• Tighten with a 1.2 hex hand driver• Packing unit: impression coping body + guide pin(*)

Narrow Type • Used in fabricating a temporary prosthesis (Ti Gr-3)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• A protective cap• Tighten with a 1.2 hex hand driver

• Screw-retained prosthesis for multiple prosthetic options• Shares the same platform as the multi-angled abutment• Restorative components: US aesthetic low cylinder (regular/non-hex)• Torque using multi abutment outer driver...

• Screw-retained prosthesis for multiple prosthetic options• Shares the same platform as the multi-angled abutment• Restorative components: US aesthetic low cylinder (regular/non-hex)• Torque using multi abutment outer driver...

• Cement/screw-retained temporary prosthesis• Utilized for producing provisional prostheses after prepping• Impressions taken at the implant level• Torqued using a 1.2 hex driver• Recommended torque for tightening: 20Ncm•...

• Cement/screw-retained temporary prosthesis• Utilized for producing provisional prostheses after prepping• Impressions taken at the implant level• Torqued using a 1.2 hex driver• Recommended torque for tightening: 20Ncm•...

• Abutment designed for creating screw-retained prostheses• Used for producing customized casting prosthesis through non-precious alloy• Melting temperature of abutment: 1,400~1,450°C (2552~2822°F)• Impressions taken at the...

• Abutment designed for creating screw-retained prostheses• Used for producing customized casting prosthesis through non-precious alloy• Melting temperature of abutment: 1,400~1,450°C (2552~2822°F)• Impressions taken at the...

• Cast with non-precious metal alloys• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• Screw-retained prosthesis• Cast with gold alloys• Cylinder melting point: 1400~1450°C (2552~2642°F)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw

• Abutment designed for creating cement-retained or combination prostheses• Utilized to modify the contour of abutment margins• Impressions taken at the implant level• Tighten using a 1.2 hex driver• The gingival height is 0.5mm...

• Abutment designed for creating cement-retained or combination prostheses• Utilized to modify the contour of abutment margins• Impressions taken at the implant level• Tighten using a 1.2 hex driver• The gingival height is 0.5mm...

• Abutment designed for creating cement-retained or combination prostheses• Utilized to modify the contour of abutment margins• Impressions taken at the implant level• Tighten using a 1.2 hex driver• The gingival height is 0.5mm...

• Laboratory analog for capturing implant level impressions• There are two variations, each tailored for implants with a diameter of Ø3.5/4.0 or larger

• Abutment designed for creating cement-retained or combination prostheses• Utilized to modify the contour of abutment margins• Impressions taken at the implant level• Tighten using a 1.2 hex driver• The gingival height is 0.5mm...

• Abutment designed for creating cement-retained or combination prostheses• Compensates for implant insertion angles up to 23° without requiring removal• Suitable for implant-level impressions • Tighten using a 1.2 hex...

• Abutment designed for creating cement-retained or combination prostheses• Compensates for implant insertion angles up to 23° without requiring removal• Suitable for implant-level impressions • Tighten using a 1.2 hex...

• Abutment designed for creating cement-retained or combination prostheses• Compensates for implant insertion angles up to 23° without requiring removal• Suitable for implant-level impressions • Tighten using a 1.2 hex...

• Components for implant level impression using an Closed Tray method.• Features a stable triangular arc structure for secure fastening and precise repositioning.• Tighten with a 1.2 hex hand driver.• The gingival height is 0.5mm...

• Components for implant level impression using an Closed Tray method.• Features a stable triangular arc structure for secure fastening and precise repositioning.• Tighten with a 1.2 hex hand driver.• The gingival height is 0.5mm...

• Components for implant level impression using an Closed Tray method.• Features a stable triangular arc structure for secure fastening and precise repositioning.• Tighten with a 1.2 hex hand driver.• The gingival height is 0.5mm...

• Components for implant level impression using an Closed Tray method.• Features a stable triangular arc structure for secure fastening and precise repositioning.• Tighten with a 1.2 hex hand driver.• The gingival height is 0.5mm...

• Components for implant level impression using an Closed Tray method.• Features a stable triangular arc structure for secure fastening and precise repositioning.• Tighten with a 1.2 hex hand driver.• The gingival height is 0.5mm...

• Abutment for cement-retained/combination prosthesis at implant level impression• Abutment level impression is available using the rigid impression coping (Ø4.0 excluded)• EK abutment holding system simplifies abutment seating when...

• EK Pick-up (Open Tray) Impression Coping Guide Pin