Prosthetics

• Cement/combination-retained prosthesis• Implant level impression• Able to take abutment level impression using a retraction cap• Torque using a 1.2 hex driver• Recommended tightening torque: 30Ncm• Packing unit: abutment...

• Cement-retained prosthesis• Ideal for molar cases due to its larger volume (compared to the solid abutment), trim as needed• Abutment level impression• Ø4.8: Torque using a 1.2 hex driver or an excellent solid abutment...

• Designed for ease of use and predictability when processing attachments into full and partialoverdentures, using either a chairside or laboratory procedure 18mL Cartridge• 18ml Cartridge• Mixing Tips: 10ea

• Designed for ease of use and predictability when processing attachments into full and partialoverdentures, using either a chairside or laboratory procedure 4mL Syringe• 4ml Syringe and Plunger• Mixing tip: 15ea• Angled Tip: 15ea

• Cement-retained prosthesis• Ideal for molar cases due to its larger volume (compared to the solid abutment), trim as needed• Abutment level impression• Ø4.8: Torque using a 1.2 hex driver or an excellent solid abutment...

• Used only for insertion and removal of the Retention and Processing Inserts

• The pre-inserted Black Processing Insert is used during the pick-up and try-inprocesses• Packing unit: 4ea

• Permanently attached into the overdenture allowing the Retention Inserts to pivot during insertion and removal• Packing unit: 4ea

• Cement-retained prosthesis• Abutment level impression• Ø4.8: Torque using a solid abutment driver (code: SDSL/SDSS)• Ø6.0: Torque using a 1.2 hex driver or solid abutment driver• Recommended tightening torque:...

• Used to transfer the position of the abutment from the mouth into the model

• Inserted into the Impression Coping• Packaged in three dimensions to accommodate smaller and larger sized implants

• Cement-retained prosthesis• Abutment level impression• Ø4.8: Torque using a solid abutment driver (code: SDSL/SDSS)• Ø6.0: Torque using a 1.2 hex driver or solid abutment driver• Recommended tightening torque:...

• Screw-retained prosthesis in multiple scenarios• Angle compensation up to 60°• Torque using convertible abutment outer driver    - Ø4.0: torque using o-ring abutment driver (code: AORD)    - Ø5.0/6...

• Blocks out undercut areas immediately• Surrounds the abutment• Keeps the rim of the Denture Attachment Housing clean during the pick-up

• Screw-retained prosthesis in multiple scenarios• Angle compensation up to 60°• Torque using convertible abutment outer driver    - Ø4.0: torque using o-ring abutment driver (code: AORD)    - Ø5.0/6...

• Screw-retained prosthesis in multiple scenarios• Angle compensation up to 60°• Torque using convertible abutment outer driver    - Ø4.0: torque using o-ring abutment driver (code: AORD)    - Ø5.0/6...

• Creates a recess in the overdenture• Allows the Denture Attachment Housing to be seated without any interference• Along with the surrounding overdenture acrylic.

• Screw-retained prosthesis in multiple scenarios• Angle compensation up to 60°• Torque using convertible abutment outer driver    - Ø4.0: torque using o-ring abutment driver (code: AORD)    - Ø5.0/6...

• Retains overdenture with O-ring system• Angle compensation up to 20°• Torque using O-ring driver (code: AORD)• Recommended tightening torque: 30Ncm (mini/regular)• Ball head diameter• Normal size: Ø2.25 (H 3...

• Retains overdenture with O-ring system• Angle compensation up to 20°• Torque using O-ring driver (code: AORD)• Recommended tightening torque: 30Ncm (mini/regular)• Ball head diameter• Normal size: Ø2.25 (H 3...

• Retains overdenture with O-ring system• Angle compensation up to 20°• Torque using O-ring driver (code: HAORD)• Recommended tightening torque: 30Ncm (mini/regular)• Ball head diameter• Normal size: Ø2.25 (H 3...

• Nylon Inserts pivot within the Denture Attachment Housing during the insertion and removal of the overdenture• Packing unit: 4ea

• Tighten the seating or removal tip on the Locator FIXED® Seating and Removal tool from spinning

• Used to tighten or loosen the wire loop in the LOCATOR FIXED® Removal Tip

• Replacement removal tip for the LOCATOR FIXED® Seating and Removal Tool.

• Replacement seating tip for the LOCATOR FIXED® Seating and Removal Tool.

• Includes: Tool, Seating Tip, Removal Tip, Wire and Level Wrench, and a Tip Wrench.• For seating and removing the prosthesis retained by the LOCATOR FIXED®• Compatible with legacy Locator F-tx Abutments

• Gold Housing for LOCATOR FIXED®• Backward compatible and can be used with Locator® standard and extended inserts• Packing unit: 10ea

• Gold Housing for LOCATOR FIXED®• Backward compatible and can be used with Locator® standard and extended inserts• Packing unit: 4ea

  • Contains- 1 Gold LOCATOR FIXED® Denture Housing- 1 Green or Blue or Tan LOCATOR FIXED® Insert- 1 LOCATOR ® & Processing Spacer- 1 LOCATOR ® & Black Processing Insert   What are the Green...

  • Insert only• Used in 4 implant fixed, full-arch cases• Green - Cannot be used with LOCATOR FIXED® Blue or Tan inserts• Blue - Used in combination with LOCATOR FIXED® Tan anterior/posterior insert• Tan - Used in...

  • Insert only• Used in 4 implant fixed, full-arch cases• Green - Cannot be used with LOCATOR FIXED® Blue or Tan inserts• Blue - Used in combination with LOCATOR FIXED® Tan anterior/posterior insert• Tan - Used in...

• One streamlined tool compatible with LOCATOR Removable and LOCATOR FIXED Inserts• Two-sided instrument designed for easy insertion and removal of any LOCATOR Insert- Insertion Tip: Effortlessly pickup inserts for transfer and placement in...

• Protects GoldCast/plastic cylinder joints duringpolishing process• Tighten with a 1.2 hex hand driver

• Protects GoldCast/plastic cylinder joints duringpolishing process• Tighten with a 1.2 hex hand driver

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + EbonyGold screw

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + EbonyGold screw

• Locator torque driver

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + EbonyGold screw

• Protective cap• Tighten with a 1.2 hex hand driver• Packing unit: protect cap + EbonyGold screw