Description

Description

• It may not be fastened or disconnected when connecting a normal handpiece
• Driver should be used after matching the groove or section of the outer triangle and abutment
• Solid, excellent solid driver is compatible only with Ø4.8
• 1.2 hex type L is 5

View AllClose

Torque Driver

• Driver for torque wrench• Tip holding function• May bend or break if excessive torque is applied• Damage is possible even at low torque if not fully engaged• Apply vertical pressure when applying...

Angled Torque Driver

• Driver for torque wrench• No holding function• Recommended tightening torque: 30Ncm (excessive torque causes fracture)• Do not remove tube to prevent fragmentation when broken• Recommended number...

Repair Torque Driver

• Reduced diameter of shank compared to the Torque Driver (Ø2.1 → 1.6)• The diameter of the screw hole can be minimized during prosthetic repair or SCRP procedures