Description

View AllClose

Additional Information

Manufacturer:	Hiossen
Product Category:	OssBuilder Kit

View AllClose

Ø4.0 Cover Cap (EK/ET)

•Submerged procedure•Compatible with OB2 and OB3•Tightened with a 0.9 hex hand drive•Recommended tightening torqu??Disposable. Do not reuse

Ø4.0 EK Healing Abutment

• Hand tighten it with a 1.2 hex driver• The gingiva height is 0.5mm higher when engaged in Ø3.5 implant

Ø5.0 Healing Cap (EK/ET)

Healing Cap (EK/ET)•Non-submerged procedure•Compatible with OB2 and OB3•Tightened with a 0.9 hex hand drive•Recommended tightening torque : 5~8Ncm??Disposable. Do not reuse

Ø4.0 ET Healing Abutment Mini

• Mini platform prosthetic parts for Ø3.5 & 3.2 implants colored in yellow• Tighten with a 1.2 hex hand driver

Ø4.0 ET Healing Abutment Regular

• Tighten with a 1.2 hex hand driver

Ø4.0 EK Angled Abutment

• Abutment designed for creating cement-retained or combination prostheses• Compensates for implant insertion angles up to 23° without requiring removal• Suitable for implant-level...

Ø4.0 EK Cover Screw

• Depending on the depth of the implant, choose the height (H) of the cover screw• Ø3.5 implant used exclusive cover screws• Hand tighten it with 1.2 hex driver

• Cement-retained prosthesis• Abutment level impression• Ø4.0: torque using the outer driver (code: HORDML/HORDMS)• Ø4.5/5.0/6.0: torque using the outer driver or 1.2 hex driver• Ø7.0: torque using...

Ø4.0 EK Temporary Abutment

• Cement/screw-retained temporary prosthesis• Utilized for producing provisional prostheses after prepping• Impressions taken at the implant level• Torqued using a 1.2 hex driver• Recommended torque...

Ø4.0 Healing Cap (EK/ET)

Description

Additional Information

Related Products