Description

• Abutment designed for creating screw-retained prostheses
• Used for producing customized casting prosthesis through non-precious alloy
• Melting temperature of abutment: 1,400~1,450°C (2552~2822°F)
• Impressions taken at the implant level
• Tighten using a 1.2 hex driver.
• Recommended tightening torque: 20Ncm(mini), 30Ncm(regular)
• Packaging unit: Abutment + Ti screw

View AllClose

Additional Information

Manufacturer:	Hiossen
System:	Excellent Treatment (ET)
Product Category:	NP-Cast Abutment
Impression:	Implant Level
Packing Unit:	Abutment + Ti Screw
Recommended Tightening Torque:	30Ncm

View AllClose

Ø4.0 EK NP-Cast Abutment

Ø4.0 ET Healing Abutment Mini

• Mini platform prosthetic parts for Ø3.5 & 3.2 implants colored in yellow• Tighten with a 1.2 hex hand driver

Ø4.0 Mini ET Transfer Abutment

• Cement-retained/combination type• Implant level impression• Abutment level impression is available using the rigid impression coping (Ø4.0 excluded)• Torque using a 1.2 hex driver• Recommended...

Ø4.0 Mini ET Rigid Abutment

• Cement-retained prosthesis• Abutment level impression• Ø4.0: torque with the outer driver (code: HORDML/HORDMS)• Ø4.5/5.0/6.0: torque with the outer driver or 1.2 hex driver• Ø7.0: torque with a 1...

Ø4.0 ET Mini Convertible Abutment

• Screw-retained prosthesis in multiple scenarios• Angle compensation up to 60°• Torque using convertible abutment outer driver - Ø4.0: torque using o-ring abutment driver (code:...

Ø4.0 ET Mini NP-Cast Abutment