Description

• Abutment designed for creating cement-retained or combination prostheses
• Compensates for implant insertion angles up to 23° without requiring removal
• Suitable for implant-level impressions
• Tighten using a 1.2 hex driver
• The gingival height is 0.5mm higher when engaged in Ø3.5 implant
• Recommended tightening torque: 30Ncm
• Packaging unit: Abutment + Ti-screw

View AllClose

Additional Information

Manufacturer:	Hiossen
System:	Exceptional Key (EK)
Product Category:	Angled Abutment
Impression:	Implant Level
Packing Unit:	Abutment + Ti Screw
Recommended Tightening Torque:	30Ncm

View AllClose

Ø4.0 EK Rigid Abutment

• Cement-retained prosthesis• Abutment level impression• Ø4.0: torque using the outer driver (code: HORDML/HORDMS)• Ø4.5/5.0/6.0: torque using the outer driver or 1.2 hex driver• Ø7.0: torque using...

Ø4.0 EK Healing Abutment

• Hand tighten it with a 1.2 hex driver• The gingiva height is 0.5mm higher when engaged in Ø3.5 implant

Ø4.0 EK Transfer Abutment

• Abutment for cement-retained/combination prosthesis at implant level impression• Abutment level impression is available using the rigid impression coping (Ø4.0 excluded)• EK abutment holding system...

Ø4.0 EK Temporary Abutment

• Cement/screw-retained temporary prosthesis• Utilized for producing provisional prostheses after prepping• Impressions taken at the implant level• Torqued using a 1.2 hex driver• Recommended torque...

Ø4.0 EK NP-Cast Abutment

• Abutment designed for creating screw-retained prostheses• Used for producing customized casting prosthesis through non-precious alloy• Melting temperature of abutment: 1,400~1,450°C (2552~2822°F)•...

Ø4.0 EK FreeForm ST Abutment

• Abutment designed for creating cement-retained or combination prostheses• Utilized to modify the contour of abutment margins• Impressions taken at the implant level• Tighten using a 1.2 hex driver•...

Ø4.0 EK Gold Cast Abutment

• Abutment designed for creating cement-retained or combination prostheses• Used for producing customized prosthesis through gold alloy casting.• Melting temperature of abutment: 1,400~1,450°C...

Ø6.0 EK Angled Abutment

• Abutment designed for creating cement-retained or combination prostheses• Compensates for implant insertion angles up to 23° without requiring removal• Suitable for implant-level...

Ø5.0 EK Angled Abutment

• Abutment designed for creating cement-retained or combination prostheses• Compensates for implant insertion angles up to 23° without requiring removal• Suitable for implant-level...

Ø4.0 EK Angled Abutment

Description

Additional Information

Related Products