Prosthetic & Maintenance Kits

• Tool used to remove the excess cast after plastic coping is set• For both solid Ø6.0 and excellent solid Ø4.8• P = Platform

• Tool used to remove the excess cast after plastic coping is set• For both solid Ø6.0 and excellent solid Ø4.8• P = Platform

• Tool used to remove the excess cast after plastic coping is set

• Tool used to remove the excess cast after plastic coping is set

• Tool used to remove the excess cast after plastic coping is set

• Tool used to remove the excess cast after plastic coping is set

• Tool used to remove the excess cast after plastic coping is set

• Tool used to remove the excess cast after plastic coping is set Reamer user guide1. Select a reamer tip that is the same size as Abutment size and connect it to the burn-out cylinder2. Firmly grasp the casting body and rotate the Reamer Bite with...

• Connects to the Torque Driver

• Tool used convert a machine driver into a bi-directional connection for the torque wrench

• Tool to check path and measure gingival height after EK implant placement* *C = Connection

• Tool to check path and measure gingival height after ET implant placement* *C = Connection

• Torque driver for Multi-Abutments

• Machine driver for Multi-Abutments

• Driver for Octa Abutments• Recommended tightening torque: 30Ncm

• Driver for Stud Abutment

• Driver for Excellent Solid Abutments• Connect to the solid abutment by matching up the groove with the triangular indicator• Recommended tightening torque: 30Ncm

• Driver specific for solid abutments• Connect to the solid abutment by matching up the groove with the triangular indicator• Recommended tightening torque: 30Ncm

• Driver for Rigid Abutments• Recommended tightening torque: 30Ncm

• Driver for Rigid Abutments• Recommended tightening torque: 30Ncm

• Driver for Rigid Abutments• Recommended tightening torque: 30Ncm

• Driver for Rigid Abutments• Recommended tightening torque: 30Ncm

• It may not be fastened or disconnected when connecting a normal handpiece• Driver should be used after matching the groove or section of the outer triangle and abutment• Solid, excellent solid driver is compatible only with Ø4...

• Reduced diameter of shank compared to the Torque Driver (Ø2.1 → 1.6)• The diameter of the screw hole can be minimized during prosthetic repair or SCRP procedures

• Driver for torque wrench• No holding function• Recommended tightening torque: 30Ncm (excessive torque causes fracture)• Do not remove tube to prevent fragmentation when broken• Recommended number of use: 10 times

• Manual driver• Tip holding function (except internal hex type)• Internal hex type length: 11mm

• Driver for engine• Tip holding feature (except internal hex type)• Internal hex type length : 8