Taper Kit

Removal Tool

Ø3.0 Sidecut drill for Taper Kit

• The drill is used to remove cortical bone of the hard bone (used right after the use of Taper Drill)• Dedicated drill for each implant diameter• F3.5~5.0 drill marking line: bottom line 8.5mm or less, top line 10mm or more implant...

• Taper drill for taper(III type) implant by diameter and length• Stopper drill with 1mm space• Color coding displays implant diameter• F3.5: yellow, F4.0: green, F4.5: blue, F5.0: red, F5.5: yellow• Taper Kit single item...

Optimized to taper fixture Built in stopper helps control drilling depth Good cutting force (excellent drilling power) and low ricocheting Color coded to differentiate drill diameter

Forming a hole to facilitate initial drillingBone density determined through drilling

Used for limited access for the Stopper Drill into the oral cavity

• Releases excessive torque when hand piece does not move due to being stuck in bone during expansion drill removal process.• Use with an open wrench to turn the hex of the Expansion drill • Prevents from over torquing

• Drill Extension

• Connects to mounted implants for placement• For use with a handpiece/implant motor

• Connects directly to an ET implant for final adjustments to the implant's depth• *C = Connection

For 122 Taper Kit/Taper KitLong stopper (6mm): Enabling a procedure without drill extension for posterior regionThe color coded stopper indicates the drill length.

• Extends the length of the screw driver and remover body (by 10mm)

• Driver for torque wrench• Tip holding function• May bend or break if excessive torque is applied• Damage is possible even at low torque if not fully engaged• Apply vertical pressure when applying torque driver (Do not...

• Manual driver• Tip holding function (except internal hex type)• Internal hex type length: 11mm